On 13 Mar, 12:50, Baz <boogy...@gmail.com> wrote:
> Probably a simple one this,
>
> I have a RAID 5 SAS array on a HP DL380G5 which shows in the HP
> utility as being 237GB.
>
> However, SCO using FDISK or divvy only shows ~14GB of disk, with no
> more space left for partitions.
>
> I did find an article to do with an updated wd driver, but only
> mentioned the 14GB problem with IDE drives, do you think this patch
> would work with SAS drives or could it be something else?

Hmm, this is odd.

The TA at:

http://www.sco.com/ta/126819

suggests that you should, depending on the BTLD you are using
you should be able to see up to 539Gb in size.

You havent said what version of SCO you are using and what
BTLD you are using but I would recommend that you:

1) Make sure you have the latest BLTD
2) Make sure you have the latest Maintenance Pack installed
3) Check the notes in the CHWP at:

http://www.sco.com/chwp

for the model og HP Server you are installing

4) Follow the guide at:

http://www.sco.com/ta/119088

if it is OpenServer 5 you are installing or have installed on this
machine.

If none of the above helps then I would contact your SCO Support
provider
for further assistance.

John