On 14 Mar, 13:47, jbol...@sco.com wrote:
> On 13 Mar, 12:50, Baz <boogy...@gmail.com> wrote:
>
> > Probably a simple one this,
>
> > I have a RAID 5 SAS array on a HP DL380G5 which shows in the HP
> > utility as being 237GB.
>
> > However, SCO using FDISK or divvy only shows ~14GB of disk, with no
> > more space left for partitions.
>
> > I did find an article to do with an updated wd driver, but only
> > mentioned the 14GB problem with IDE drives, do you think this patch
> > would work with SAS drives or could it be something else?
>
> Hmm, this is odd.
>
> The TA at:
>
> http://www.sco.com/ta/126819
>
> suggests that you should, depending on the BTLD you are using
> you should be able to see up to 539Gb in size.
>
> You havent said what version of SCO you are using and what
> BTLD you are using but I would recommend that you:
>
> 1) Make sure you have the latest BLTD
> 2) Make sure you have the latest Maintenance Pack installed
> 3) Check the notes in the CHWP at:
>
> http://www.sco.com/chwp
>
> for the model og HP Server you are installing
>
> 4) Follow the guide at:
>
> http://www.sco.com/ta/119088
>
> if it is OpenServer 5 you are installing or have installed on this
> machine.
>
> If none of the above helps then I would contact your SCO Support
> provider
> for further assistance.
>
> John

Sorry, SCO version is 5.0.7, the BTLD's are the latest from HP