I take it that the CDROM is set to boot as the it started the install on
the old drive.

I have no idea, how to get into the Bios, I have never needed to before
now. All I have is a box which I telnet into. Thats as far as my
knowledge on them goes

I tried them all F1, Enter, pressing "4" numerous times which then
starts to print thousands of characters to the screen, then ....... hangs

Paul

Patrick Agsten wrote:
> Hi Paul,
>
> Paul Goodyear wrote:
>
>> but when I connect it up I get a error (exclamation mark): 20A80004 at
>> the top of the screen and lower down it goes through BOOTP s = 1 to
>> 10. Then just stops.
>
>
> This occures if the system does not find any device to boot from. Make
> sure You have set the cdrom to boot in the open rom.
>
>
>> How do I install AIX on this new HD? The new HD has no jumpers on same
>> as the drive already in the system.
>
>
> Is the harddisk to be seen in the bios?
>
>
>> When I put the AIX 4.3.2 install cd in it comes up with a "press F1
>> and Press Enter to use this console" but it just hangs there,
>
>
> ... until You press F1 ;-)
>
> Patrick
>