rnaquin@ashp.org (Rick) wrote in message news:<623b7a42.0410071001.1488ec96@posting.google. com>...
> Currently trying to install AIX 5.2 on an F50. The install from CD
> works fine until the very end, where after creating the boot image the
> install process reboots the server. The reboot fails and the server
> just shuts down with the 20EE000B LED code. The code, to the best of
> my knowledge, says that no boot image was found from the bootlist.
> The install process always fails. Have tried to install to different
> disks and scsi controllers thinking maybe that was the culprit. The
> install process should be establishing the correct bootlist, yet it
> acts as though it can't find the boot image. I've reduced the server
> to one disk and controller and still the install process fails at the
> reboot. Any help would be greatly appreciated.
>
> Thanks

You are correct..the code means unable to find a boot device. I
upgraded an F50 from 4.3.3 to 5.2 quite a while back, as a test before
doing that to the production F80. It worked fine for me, although I
upgraded the firmware to the latest, just to be safe. I don't
remember that being a requirement, and it may not be your problem, but
I thought I'd mention it.

Steve