On Mar 25, 2:07*am, mark...@gmx.de wrote:
> On 20 Mrz., 16:40, jdh13 <jd...@free.fr> wrote:
>
>
>
>
>
> > mark...@gmx.de a écrit :
>
> > > Hi,
>
> > > i just tried to install my new T1000 machine via Jumpstart. Since the
> > > machine has
> > > no CD/DVD-ROM or USB connector this is the only chance :-)
>
> > > My jumpstart server (Images are from 11/06) was already configured for
> > > sum4u machines.
> > > This ist my firts T1000 machine. When adding the machine via
> > > add_install_client I told
> > > Jumpstart that it is a sun4v architecture.
>
> > > So far so good. Installation started and ends sucessfull. But when I
> > > reboot the machine
> > > it stops here:
>
> > > Rebooting with command: boot
> > > Boot device: disk *File and args:
> > > Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
> > > FCode UFS Reader 1.12 00/07/17 15:48:16.
> > > ERROR: /pci@7c0/pci@0/pci@8/scsi@2/disk: Last Trap: Division by Zero
>
> > > I checked the boot device but I have no clue what happened here.
>
> > > Any ideas?
>
> > go to prompt ok:
> > setenv auto-boot? false
> > reset-all
> > boot -rsv- Zitierten Text ausblenden -
>
> > - Zitierten Text anzeigen -
>
> Thanks, but the situation has not changed after these commands... - Hidequoted text -
>
> - Show quoted text -

Late reply, am sure you found this already but if not,
Below is what I've found on sunsolve pertaining to T2000 jumpstart
kernel errors
Document ID: 83464
Title: Jumpstart of UltraSPARC® T1 based system panics
Update Date: Wed Dec 21 00:00:00 MST 2005
Products: Sun Fire T2000 Server, Sun Fire T1000 Server

Resolution: The T1000/T2000 systems based upon the UltraSPARC T1
Processor (Niagara) and are
'sun4v' architecture systems which is different than the previous
UltraSPARC
servers. So when the add_install_client command is run the
administrator must
specify the correct architecture type 'sun4v' and NOT 'sun4u' as was
needed for
previous UltraSPARC systems. So you can jumpstart it using a
flasharchive built on another sun4v server only.