Try running:
devlinks
disks


On Sun, 27 Jul 2003 17:30:57 GMT, "Rodrick Brown"
<phusnikn-nospam-@cynikal.net> wrote:

>Are you running devfsadm -C ?
>what does luxadm probe return ?
>
>"Paul" <Paul.Cox@dsl.pipex.com> wrote in message
>news:3f22f848$1$11380$cc9e4d1f@news.dial.pipex.co m...
>> Hi group
>>
>> I'm desperate for help and I'm hoping a guru is out there waiting to help.
>>
>> I have just installed 4 new hard disks into an existing D1000 but Solaris
>> cannot see them. They are visible to the OBP when running a
>probe-scsi-all
>> :
>>
>> /pci@8,700000/scsi@2
>> Target 0
>> Unit 0 Disk SEAGATE ST336704LSUN36G 032C
>> Target 1
>> Unit 0 Disk SEAGATE ST336704LSUN36G 032C
>> Target 2
>> Unit 0 Disk SEAGATE ST336704LSUN36G 0326
>> Target 3
>> Unit 0 Disk SEAGATE ST336607LSUN36G 0307
>> Target 4
>> Unit 0 Disk SEAGATE ST336607LSUN36G 0307
>> Target 8
>> Unit 0 Disk SEAGATE ST336704LSUN36G 032C
>> Target 9
>> Unit 0 Disk SEAGATE ST336704LSUN36G 032C
>> Target a
>> Unit 0 Disk SEAGATE ST336704LSUN36G 0326
>> Target b
>> Unit 0 Disk SEAGATE ST336607LSUN36G 0307
>> Target c
>> Unit 0 Disk SEAGATE ST336607LSUN36G 0307
>> Target e
>> Unit 0 Processor SYMBIOS D1000 2
>> Target f
>> Unit 0 Processor SYMBIOS D1000 2
>>
>> (The new disks all have the 0307 firmware)
>>
>> But whenever I run a devfsadm, touch reconfigure boot or a boot -- -r they
>> are never visible to format, only the original disks in the D1000 and the
>2
>> internal root disks.
>>
>> I'm now starting to run out of ideas of what to try, there is nothing to
>> change in /kernel/drv/sd.conf as these targets are already defined by
>> default.
>>
>> I have done a boot net -s off of my jumpstart server and the disks are
>> immediately visible to format but not through the OS on the root disk. So
>I
>> believe the problem is with the OS rather than being a hardware fault.
>>
>> Can anyone give me some other places to look?? I've searched sunsolve and
>> net to no avail.
>>
>> Thanks in advance, Paul.
>>
>>
>>
>