Has anybody been successful connecting a Samsung SyncMaster 243T to
SunBlade 1000 running Solaris 9 with a Creator 3D Series 3 Graphics card
(X3670A)?

I'm not very experience with Sun workstations; I inherited the
workstation, and bought the 24" monitor (it works fabulously with my
Powerbook!) because I thought it was substantially the same as the Sun
24" monitor. I installed patch 112621-12, which the documentation said
was supposed to recognize the 1920x1200x60d, and includes the most
up-to-date ffbconfig.

When I hook it up, the only resolution that works is the 1152x900 at 66
Hz, and even that looks terrible, multiple with shadows off to the right.

Below is the ffbconfig for the configuration and the supported
resolution.

Any suggestions would be very much appreciated.

#ffbconfig -prconf

--- Hardware Configuration for /dev/fbs/ffb0 ----
Type: double-buffered FFB2+ with Z-buffer
Board: rev 2 (Vertical)
PROM Information: @(#)ffb2p.fth 2.0 98/07/14
FBC: version 0x3241906d
DAC: Brooktree 9070, version 1 (Pac2)
3DRAM: Mitsubishi 130b, version 2
EDID Data: Not Available
Monitor Sense ID: 7 (Unknown monitor type, defaulting to Sun 19" monitor)
Monitor possible resolution: 1152x900x66
Current resolution setting: 1152x900x66

#ffbconfig -res ?
Valid values for -res option are:
NONE
1024x768x60 *
1024x768x70 *
1024x768x75 *
1024x768x77 *
1024x768x84 *
1152x900x66
1152x900x76 *
1280x800x76 *
1280x1024x60 *
1280x1024x67 *
1280x1024x76 *
1280x1024x85 *
960x680x112s *
960x680x108s *
640x480x60 *
640x480x60i *
768x575x50i *
1440x900x76 *
1600x1000x66 *
1600x1000x76 *
1600x1280x76 *
1920x1080x72 *
1920x1200x70 *
1920x1200x75 *
1600x1200x60 *
1600x1200x75 *
1600x1200x60d *
1920x1080x60d *
1920x1200x60d *
1280x1024x60c *
svga *
1152 *
1280 *
stereo *
vga *
ntsc *
pal *
Notes:
* monitor does not support this resolution

Thomas Van Lent
Everglades Foundation
gladesfoundation@bellsouth.net