In /var/log/XFree86.1.log contains:
(WW) warning, (EE) error, (NI) not implented (??) unknown.
(EE) R128(0): Virtual height (0) is too small for the hardware (min 128)
(EE) Screens(s) found, but none have a usable configuration.

How do I work it out from here..... Please advice.
Thanks.

Andreas Janssen wrote:

> Hello
>
> cljlk (<cljlk@hotmail.com>) wrote:
>
>
>>Add one more thing here. I cat /proc/fb, the fb file is blank,
>>contains 0 byte. Please help.
>>
>>cljlk wrote:
>>
>>
>>>I did check the /var/log/XFree86.0.log. The error are:
>>>(II) R128(0) Not using default mode "640x480" (hsync out of range)
>>>(II) R128(0): not using default mode "320x240" (bad mode
>>>clock/interlace/doublescan)
>>>
>>>What should I do to trigger the problem.
>>>I know the X server is running, when I reboot the system I notice
>>>that. Thanks.
>
>
> Maybe the configuration data for your graphic card is wrong. Take a look
> at the XFree configuration file (/etc/X11/XF86Config-4 or
> /etc/X11/XF86Config). especially the "Device" section. Also see if the
> XFree log file contains any lines beginning with (EE) or (WW).
>
> best regards
> Andreas Janssen
>