P.T. Breuer wrote:
> noone <noone@noone.org> wrote:
>
>><4>hdc: command error: status=0x51 { DriveReady SeekComplete Error }
>><4>hdc: bad_request: error=0x54 I/O error, dev 16:00 (hdc) sector 1196808
>
>
> Fix your cable or cdrom drive or controller (maybe torn off/on dma).
>
> You sure it's jumpered correctly? It says its master on the second ide
> bus - so there should be nothing else on that bus except maybe another
> cdrom. That is, if it is _really_ a cdrom, and not a cdrw, or dvd ...
>
>

There is the CDROM drive and a CDRW drive on the second bus.
I have used the CDROM drive and CDRW drive for a long time without any
problems from either win and the working RH 7.2 installation, and have
installed RH 7.2 from the CDROM drive just a week before.

How did "know" that the CDROM is master on the second IDE bus when you
said "It says its master on the second ide bus" ?


>>This happens when the installer tries to copy or read
>>setup-2.5.27-1.1.noarch.rpm.
>
>
> Move it to the other bus.

Only problem with moving the CDROM to the other bus is all are used, and
winoze ( dual-boot ) may not like it