Mike Brown wrote:
> AngieW wrote:
> >
> > Hi All
> > Jean-Pierre Radley wrote:
> > > AngieW typed (on Thu, Dec 09, 2004 at 07:20:48AM -0800):
> > > | Hi All,
> > > | Ive searched the archive for this but did not really find a
> > resolution!
> > > | Nice new fresh install of osr506 with the stanard sco ppp
> > > | I removed sco ppp and rebooted.
> > > | I then added 506a and rebooted.
> > > | I then added mstppp 2.1.2 and rebooted again after the kernel
> > relink.
> > >
> > >
> > > 2.1.2 ??
> > > Not 2.1.5, or 2.1.4 ?
> >
> > It's 2.1.2a as I had tried 2,1,5a from the 507 cd with the same
result
> > befoer the
> > server was reinstalled from square one.
> > My one internal 506 box is what I used to test bed this and I used
> > 2.1.5a from the
> > 507 cd without any problems. My 506 media kit is out on loan so
I've
> > not been
> > able to try 2.1.4a.
> >
> > Any other ideas?
> >
> > I can't even hide the messages on tty12 with cn.console=12 in a the
> > bootstring :-(
> >
> > They don't seem to cause any problem!
> >
> > >
> > > | The dreadfull message that follows now pops up rather
regularly.
> > > | This is a line from syslog
> > > | Dec 9 17:01:44 scosysv tunioctl(0): Unknown ioctl 0x00000005
> > >
> > > --
> > > JP
> >
> > Cheers
> > Ang
> > --
> > angiedoteohdotcodotza
>
> Check to see when MSTPPP is up and running that the remote gateway,
> and DNS servers entries are correct and are responding.

Its got zippo to do with dns! Its a stanalone system with 2 win98/2k
dialin users.

> I have had better luck running the modem in full HW flow control
mode,
> which requires the MSTPPP config lines to be editted. In my setup I
> used "rtscts-rtsflow" in the Account file.

Errors pop up in the early boot phase and everytime I run netstat -a
and most
times a users connect to syspro60 on port 86 for mf cobol.

Cheers
Ang