Ian Wilson wrote:

> Tony Lawrence wrote:
> > Ian Wilson wrote:
> >
> >> I replaced a failed SCSI tape drive on an OSR507 system and
> >> subsequently get this message at start-up:
> >>
> >> NOTICE: cha: SCSI bus has been reset ha=1
> >> Attached SCSI peripherals will return to power up state \
> >> (cha N04)
> >> NOTICE: cha: Unexpected SCSI phase change \
> >> ha=1 id=6 lun=0 cmd=12 blk=0 len=36
> >> A SCSI peripheral behaved unexpectedly
> >> Use Compaq diagnostics to confirm a hardware failure \
> >> (chaN02)
> >
> > http://aplawrence.com/SCOFAQ/FAQ_scotec6cha.html ?
>
> Doh! I should have looked there before posting.
> Thanks Tony.

The advice it gives:

"int cha_print_warnings=0;"

seems a little questionable to me. You don't know what other warnings
it might turn off (media error messages? "The controller hardware
reports it's about to die"?) I recommend leaving the warning on and
simply ignoring it.

>Bela<