On Sep 6, 4:35 pm, mbennett <mbenn...@claritysoftwaresystems.com>
wrote:
> Edit /etc/default/tape, change xct0 to rct0 (or rStp0) and tape status
> will work.
>
>
>
> TSIs2000 wrote:
> > Greetings,
>
> > I am trying to configure a DAT tape drive on Dell PE 840 running SCO
> > 5.0.7.
>
> > On boot I see for the Seagate DAT-72:
>
> > Slot #3
> > Ch A
> > ID 6
> > LUN 0
> > BUS 16
>
> > And the tape drive is connect to a Adaptec 39320A. I have loaded the
> > AD320 driver and configured the tape drive as:
>
> > ad320
> > Host adapter = 0
> > Bus = 0
> > Target = 6
> > Lun = 0
>
> > However i get "can't open 'dev/xct0' when i do a 'tape status' - any
> > suggestions would be greatly appreciated~!- Hide quoted text -
>
> - Show quoted text -

Thanks to all.... got it working...was Adapter #2 ID #6 LUN 0 and BUS
0.