I can ping IP addresses, but not hostnames. I'm using the DNS servers
given by our network admin. It was like pulling teeth to get them to
give me the IPs because "everything is server assigned." Here's the
output of the various config commands. Any help would be appreciated.
dmesg:
OpenBSD 3.3 (GENERIC) #44: Sat Mar 29 13:22:05 MST 2003
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Duron Model 3 (Spitfire) ("AuthenticAMD" 686-class) 831 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MC A,CMOV,PAT,PSE36,MMX,FXSR
real mem = 402157568 (392732K)
avail mem = 366829568 (358232K)
using 4278 buffers containing 20209664 bytes (19736K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(5b) BIOS, date 10/19/01, BIOS32 rev. 0 @
0xf0f70
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x1842
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf1770/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Acer Labs M1543 PCI-ISA"
rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xcc000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Acer Labs M1647 PCI" rev 0xb0
ppb0 at pci0 dev 1 function 0 "Acer Labs M5247 AGP/PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "3DFX Interactive Voodoo3" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 2 function 0 "Acer Labs M5237 USB" rev 0x03: irq 9,
OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pciide0 at pci0 dev 4 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4:
DMA, channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <MAXTOR 6L080L4>
wd0: 16-sector PIO, LBA, 76345MB, 16383 cyl, 16 head, 63 sec,
156355584 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 92048U8>
wd1: 16-sector PIO, LBA, 19531MB, 16383 cyl, 16 head, 63 sec, 40000464
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <CREATIVE, DVD-ROM DVD2240E, 1.7A> SCSI0
5/cdrom removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <LITE-ON, LTR-16101B, TS0N> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, DMA mode 2
ohci1 at pci0 dev 6 function 0 "Acer Labs M5237 USB" rev 0x03: irq 9,
OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib0 at pci0 dev 7 function 0 "Acer Labs M1543 PCI-ISA" rev 0x00
emu0 at pci0 dev 10 function 0 "Creative Labs SoundBlaster Live" rev
0x05: irq 9
ac97: codec id 0x54524123 (TriTech Microelectronics TR28602)
audio0 at emu0
"Creative Labs SoundBlaster Live Digital Input" rev 0x05 at pci0 dev
10 function 1 not configured
"Sigma Designs DVDmagic-PRO" rev 0x02 at pci0 dev 11 function 0 not
configured
xl0 at pci0 dev 13 function 0 "3Com 3c900B 10Mbps" rev 0x04: irq 9
address 00:50:04:cf:d1:02
"Acer Labs M7101 Power Mgmt" rev 0x00 at pci0 dev 17 function 0 not
configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: 1.2MB 80 cyl, 2 head, 15 sec
biomask c240 netmask c240 ttymask c2c2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
wd0: no disk label
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd1a
rootdev=0x10 rrootdev=0x310 rawdev=0x312
WARNING: / was not properly unmounted
uhub0: port 2, set config at addr 2 failed
uhub0: device problem, disabling port 2
umass0 at uhub0 port 4 configuration 1 interface 0
umass0: PQI Flash Reader, rev 2.00/1.09, addr 2
umass0: using SCSI over BBB-P
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <Generic, STORAGE DEVICE, 0109> SCSI0
0/direct removable
sd0: drive offline
ifconfig xl0:
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:50:04:cf:d1:02
media: Ethernet 10baseT (10baseT half-duplex)
inet6 fe80::250:4ff:fecf:d102%xl0 prefixlen 64 scopeid 0x1
inet 172.17.38.69 netmask 0xfffff000 broadcast 172.17.47.255
netstat -rn:
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu
Interface
default 172.17.32.1 UGS 0 8 -
xl0
127/8 127.0.0.1 UGRS 0 0 33224
lo0
127.0.0.1 127.0.0.1 UH 2 0 33224
lo0
172.17.32/20 link#1 UC 0 0 -
xl0
172.17.32.1 0:4:4d:d7:42:0 UHL 1 0 -
xl0
172.17.32.2 link#1 UHL 1 0 -
xl0
172.17.32.24 0:3:ba:f:25:3b UHL 0 1 -
xl0
172.17.38.69 127.0.0.1 UGHS 0 0 33224
lo0
172.17.61.24 172.17.32.2 UGHD 0 0 -
xl0
224/4 127.0.0.1 URS 0 0 33224
lo0
Internet6:
Destination Gateway
Flags Refs Use Mtu Interface
::/104 ::1 UGRS
0 0 - lo0 =>
::/96 ::1 UGRS
0 0 - lo0
::1 ::1 UH
12 0 33224 lo0
::127.0.0.0/104 ::1 UGRS
0 0 - lo0
::224.0.0.0/100 ::1 UGRS
0 0 - lo0
::255.0.0.0/104 ::1 UGRS
0 0 - lo0
::ffff:0.0.0.0/96 ::1 UGRS
0 0 - lo0
2002::/24 ::1 UGRS
0 0 - lo0
2002:7f00::/24 ::1 UGRS
0 0 - lo0
2002:e000::/20 ::1 UGRS
0 0 - lo0
2002:ff00::/24 ::1 UGRS
0 0 - lo0
fe80::/10 ::1 UGRS
0 0 - lo0
fe80::%xl0/64 link#1 UC
0 0 - xl0
fe80::250:4ff:fecf:d102%xl0 0:50:4:cf:d1:2 UHL
0 0 - lo0
fe80::%lo0/64 fe80::1%lo0 U
0 0 - lo0
fe80::1%lo0 link#5 UHL
0 0 - lo0
fec0::/10 ::1 UGRS
0 0 - lo0
ff01::/32 ::1 UC
0 0 - lo0
ff02::%xl0/32 link#1 UC
0 0 - xl0
ff02::%lo0/32 ::1 UC
0 0 - lo0
Encap:
Source Port Destination Port Proto
SA(Address/Proto/Type/Direction)