> Is there actually a possibility to get AVM's fritzcard pci running on
> openbsd 3.5 (respectively the upcoming 3.6) with fax-facility? Actually
> I'm using capisuite on slackware 10 based on AVM's Kernel-Module for
> kernel 2.4 for that job.
>
> Thanks in advance.

Not really sure if it's supported, but this is what i found on my 3.5 box.

[viper@cyanide viper]$ grep -A1 -B1 -ri fritz /sys/
/sys/dev/pci/pcidevs-/* AVM products */
/sys/dev/pci/pcidevsroduct AVM FRITZ_CARD 0x0a00 Fritz ISDN
/sys/dev/pci/pcidevsroduct AVM FRITZ_PCI_V2_ISDN 0x0e00 Fritz v2.0
ISDN
/sys/dev/pci/pcidevs-product AVM B1 0x0700 BRI ISDN
--
/sys/dev/pci/pcidevs.h-/* AVM products */
/sys/dev/pci/pcidevs.h:#define PCI_PRODUCT_AVM_FRITZ_CARD 0x0a00
/* Fritz ISDN */
/sys/dev/pci/pcidevs.h:#define PCI_PRODUCT_AVM_FRITZ_PCI_V2_ISDN
0x0e00 /* Fritz v2.0 ISDN */
/sys/dev/pci/pcidevs.h-#define PCI_PRODUCT_AVM_B1 0x0700 /*
BRI ISDN */
--
/sys/dev/pci/pcidevs_data.h- {
/sys/dev/pci/pcidevs_data.h: PCI_VENDOR_AVM,
PCI_PRODUCT_AVM_FRITZ_CARD,
/sys/dev/pci/pcidevs_data.h: "Fritz ISDN",
/sys/dev/pci/pcidevs_data.h- },
/sys/dev/pci/pcidevs_data.h- {
/sys/dev/pci/pcidevs_data.h: PCI_VENDOR_AVM,
PCI_PRODUCT_AVM_FRITZ_PCI_V2_ISDN,
/sys/dev/pci/pcidevs_data.h: "Fritz v2.0 ISDN",
/sys/dev/pci/pcidevs_data.h- },
[viper@cyanide viper]$


Also...
AVM Fritz!Card PCI Patches (2.8 Tested)
http://www.zilium.de/joerg/obsd-isdn.html

Hope this helps.

-Bas