View Single Post

   
  #1 (permalink)  
Old 02-16-2008, 08:45 AM
Khalid Schofield
 
Posts: n/a
Default Atheros driver 802.11g not working

Hi,
I've a AR5213 card. It's actually a Wistron CM9 card.

I've read the man page and tried setting media to OFDM54. The man page
shows no mention of my model AR5213. Should I update the kernel? I'm
running OpenBSD 3.9 Generic i386 on a Wrap embedded pc from pcengines.
"OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006"

I tried "inet 192.168.0.3 255.255.255.0 NONE media OFDM54 nwid bubbles-networks"
I have tried to get 802.11g working but have had no sucess.

my /etc/hostname.ath0 is:
"inet 192.168.0.3 255.255.255.0 NONE media autoselect nwid bubbles-networks"

ifconfig ath0 shows:
"ath0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX ,MULTICAST> mtu
1500
lladdr 00:0b:6b:4d:50:26
groups: egress
media: IEEE802.11 autoselect (DS11 mode 11b)
status: active
ieee80211: nwid bubbles-networks chan 11 bssid 00:18:4d:10:fe:ee
inet 192.168.0.3 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::20b:6bff:fe4d:5026%ath0 prefixlen 64 scopeid 0x1
"


dmesg shows:
"ath0 at pci0 dev 13 function 0 "Atheros AR5212" rev 0x01: irq 12
ath0: AR5213 5.9 phy 4.3 rf5112 3.6, FCC2A*, address 00:0b:6b:4d:50:26
sis0 at pci0 dev 14 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq
10, a
ddress 00:0d:b9:04:a3:28
"



Any clues other than it doesn't work yet?

Thanks

*************************************
This email has been sent to you.
Reply With Quote