SEO

We run a Windows Network with web accress via ISA2000 on a proxy server.
Our new proxy server (192.168.1.28) replaces an older unit (192.168.1.21).

Our major applications are on SCO 5.05 server whose routing table is
shown below. My static routes to our subnets (192.168.2.0, 192.168.3.0,
192.168.4.0) are added at bootup (/etc/rc2.d/S85.tcp). Whenever the
Unix server is rebooted it looses the internet route for our edi
transmissions and these have to be manually entered so the host can be
found through the new proxy (192.168.1.28). The routing table shows many
routes to the OLD proxy 192.168.1.21. I have cleaned the Windows
servers of all references to the old proxy. How can I find where the
Unix routes through 192.168.1.21 are coming from?


Routing tables
Destination Gateway Flags Refs Use Interface
default 192.168.1.28 UGS 2 0 net0
64.178.59.82 192.168.1.28 UGHS 0 0 net0
64.233.161.147 192.168.1.21 UGHD 0 2 net0
66.135.192.123 192.168.1.21 UGHD 0 3 net0
66.135.192.124 192.168.1.21 UGHD 0 10 net0
68.142.226.54 192.168.1.21 UGHD 0 7 net0
127.0.0.1 127.0.0.1 UH 12 334279 lo0
192.168.0.12 192.168.1.21 UGHD 0 8 net0
192.168.1 192.168.1.24 UC 1 0 net0
192.168.1.24 127.0.0.1 UGHS 0 0 lo0
192.168.2 192.168.1.1 UGS 22 712 net0
192.168.3 192.168.1.1 UGS 0 0 net0
192.168.3.14 192.168.1.21 UGHD 0 1 net0
192.168.4 192.168.1.1 UGS 5 84 net0
192.250 192.168.1.28 UGS 0 0 net0
192.250.28 192.168.1.28 UGS 0 0 net0
192.250.28.66 192.168.1.21 UGHD 0 153 net0
207.207.237.232 207.207.237.235 UC 1 0 net1
207.207.237.235 127.0.0.1 UGHS 1 6 lo0
209.144.44.11 192.168.1.21 UGHD 0 14 net0
212 192.168.1.28 UGS 0 0 net0
212.67.80.60 192.168.1.21 UGHD 0 17 net0
216.109.118.66 192.168.1.21 UGHD 0 12 net0
216.178.92.131 192.168.1.21 UGHD 0 2 net0
224 192.168.1.24 UCS 0 0 net0

In article <-o2dndk2tsXTya3eRVn-pA@giganews.com>,
"Tony D." <nospam@nospam.com> wrote:

> We run a Windows Network with web accress via ISA2000 on a proxy server.
> Our new proxy server (192.168.1.28) replaces an older unit (192.168.1.21).
>
> Our major applications are on SCO 5.05 server whose routing table is
> shown below. My static routes to our subnets (192.168.2.0, 192.168.3.0,
> 192.168.4.0) are added at bootup (/etc/rc2.d/S85.tcp). Whenever the
> Unix server is rebooted it looses the internet route for our edi
> transmissions and these have to be manually entered so the host can be
> found through the new proxy (192.168.1.28). The routing table shows many
> routes to the OLD proxy 192.168.1.21. I have cleaned the Windows
> servers of all references to the old proxy. How can I find where the
> Unix routes through 192.168.1.21 are coming from?
>
>
> Routing tables
> Destination Gateway Flags Refs Use Interface
> default 192.168.1.28 UGS 2 0 net0
> 64.178.59.82 192.168.1.28 UGHS 0 0 net0
> 64.233.161.147 192.168.1.21 UGHD 0 2 net0
> 66.135.192.123 192.168.1.21 UGHD 0 3 net0
> 66.135.192.124 192.168.1.21 UGHD 0 10 net0
> 68.142.226.54 192.168.1.21 UGHD 0 7 net0
> 127.0.0.1 127.0.0.1 UH 12 334279 lo0
> 192.168.0.12 192.168.1.21 UGHD 0 8 net0
> 192.168.1 192.168.1.24 UC 1 0 net0
> 192.168.1.24 127.0.0.1 UGHS 0 0 lo0
> 192.168.2 192.168.1.1 UGS 22 712 net0
> 192.168.3 192.168.1.1 UGS 0 0 net0
> 192.168.3.14 192.168.1.21 UGHD 0 1 net0
> 192.168.4 192.168.1.1 UGS 5 84 net0
> 192.250 192.168.1.28 UGS 0 0 net0
> 192.250.28 192.168.1.28 UGS 0 0 net0
> 192.250.28.66 192.168.1.21 UGHD 0 153 net0
> 207.207.237.232 207.207.237.235 UC 1 0 net1
> 207.207.237.235 127.0.0.1 UGHS 1 6 lo0
> 209.144.44.11 192.168.1.21 UGHD 0 14 net0
> 212 192.168.1.28 UGS 0 0 net0
> 212.67.80.60 192.168.1.21 UGHD 0 17 net0
> 216.109.118.66 192.168.1.21 UGHD 0 12 net0
> 216.178.92.131 192.168.1.21 UGHD 0 2 net0
> 224 192.168.1.24 UCS 0 0 net0

I had to do this - manual edit of a file. Don't remember the file. Found
the answer on aplawrence.com- a great resource / consultant....have
found many answers to my questions at the site....

Regards,
TS

----- Original Message -----
From: "Ted Summers" <djtbs1@qwest.net>
Newsgroups: comp.unix.sco.misc
To: <distro@jpr.com>
Sent: Tuesday, September 20, 2005 10:01 PM
Subject: Re: Fixing route table


> In article <-o2dndk2tsXTya3eRVn-pA@giganews.com>,
> "Tony D." <nospam@nospam.com> wrote:
>
>> We run a Windows Network with web accress via ISA2000 on a proxy server.
>> Our new proxy server (192.168.1.28) replaces an older unit
>> (192.168.1.21).
>>
>> Our major applications are on SCO 5.05 server whose routing table is
>> shown below. My static routes to our subnets (192.168.2.0, 192.168.3.0,
>> 192.168.4.0) are added at bootup (/etc/rc2.d/S85.tcp). Whenever the
>> Unix server is rebooted it looses the internet route for our edi
>> transmissions and these have to be manually entered so the host can be
>> found through the new proxy (192.168.1.28). The routing table shows many
>> routes to the OLD proxy 192.168.1.21. I have cleaned the Windows
>> servers of all references to the old proxy. How can I find where the
>> Unix routes through 192.168.1.21 are coming from?
>>
>>
>> Routing tables
>> Destination Gateway Flags Refs Use Interface
>> default 192.168.1.28 UGS 2 0 net0
>> 64.178.59.82 192.168.1.28 UGHS 0 0 net0
>> 64.233.161.147 192.168.1.21 UGHD 0 2 net0
>> 66.135.192.123 192.168.1.21 UGHD 0 3 net0
>> 66.135.192.124 192.168.1.21 UGHD 0 10 net0
>> 68.142.226.54 192.168.1.21 UGHD 0 7 net0
>> 127.0.0.1 127.0.0.1 UH 12 334279 lo0
>> 192.168.0.12 192.168.1.21 UGHD 0 8 net0
>> 192.168.1 192.168.1.24 UC 1 0 net0
>> 192.168.1.24 127.0.0.1 UGHS 0 0 lo0
>> 192.168.2 192.168.1.1 UGS 22 712 net0
>> 192.168.3 192.168.1.1 UGS 0 0 net0
>> 192.168.3.14 192.168.1.21 UGHD 0 1 net0
>> 192.168.4 192.168.1.1 UGS 5 84 net0
>> 192.250 192.168.1.28 UGS 0 0 net0
>> 192.250.28 192.168.1.28 UGS 0 0 net0
>> 192.250.28.66 192.168.1.21 UGHD 0 153 net0
>> 207.207.237.232 207.207.237.235 UC 1 0 net1
>> 207.207.237.235 127.0.0.1 UGHS 1 6 lo0
>> 209.144.44.11 192.168.1.21 UGHD 0 14 net0
>> 212 192.168.1.28 UGS 0 0 net0
>> 212.67.80.60 192.168.1.21 UGHD 0 17 net0
>> 216.109.118.66 192.168.1.21 UGHD 0 12 net0
>> 216.178.92.131 192.168.1.21 UGHD 0 2 net0
>> 224 192.168.1.24 UCS 0 0 net0
>
> I had to do this - manual edit of a file. Don't remember the file. Found
> the answer on aplawrence.com- a great resource / consultant....have
> found many answers to my questions at the site....
>
> Regards,
> TS


There is an official spot for extra routes, but I almost never see it used
by others:
vi /usr/internet/etc/sco_ip/routes

If there is no such file then try this:
find /etc/rc* /etc/init.d -depth |xargs grep -l "192\.168\.1\.21"

Usually if they even have any extra routes or even a default route for the
internet,
it was done by adding commands to /etc/rc.d/8/userdef
or by adding a new script anywhere in /etc/rc.d/*
or by adding a new script in /etc/rc2.d with a number higher than 85 so it
runs after S85tcp
examples: /etc/rc2.d/S99route, S86route, S99defaultroute, S99gateway,
S99mycompany
You'll notice when looking along those lines that there is an
/etc/rc2.d/S90iproute (really /etc/init.d/iproute)
That's not an add-on, that's the stock script that reads
/usr/internet/etc/sco_ip/routes
Or they edited /etc/tcp (aka /etc/rc2.d/S85tcp)

Basically, since most people were'nt aware of the routes file (or maybe
before some particular version the S90iproutes script didn't exist yet?) you
have to browse /etc, /etc/init.d /etc/rc.d and /etc/rc2.d and look for
things that aren't stock. The above spots, which are all covered by that
find command, should turn it up though.

Brian K. White -- brian@aljex.com -- http://www.aljex.com/bkw/
+++++[>+++[>+++++>+++++++<<-]<-]>>+.>.+++++.+++++++.-.[>+<---]>++.
filePro BBx Linux SCO FreeBSD #callahans Satriani Filk!

Tony D. wrote:
> We run a Windows Network with web accress via ISA2000 on a proxy server.
> Our new proxy server (192.168.1.28) replaces an older unit (192.168.1.21).
>
> Our major applications are on SCO 5.05 server whose routing table is
> shown below. My static routes to our subnets (192.168.2.0, 192.168.3.0,
> 192.168.4.0) are added at bootup (/etc/rc2.d/S85.tcp). Whenever the
> Unix server is rebooted it looses the internet route for our edi
> transmissions and these have to be manually entered so the host can be
> found through the new proxy (192.168.1.28). The routing table shows many
> routes to the OLD proxy 192.168.1.21. I have cleaned the Windows
> servers of all references to the old proxy. How can I find where the
> Unix routes through 192.168.1.21 are coming from?
>
>
> Routing tables
> Destination Gateway Flags Refs Use Interface
> default 192.168.1.28 UGS 2 0 net0
> 64.178.59.82 192.168.1.28 UGHS 0 0 net0
> 64.233.161.147 192.168.1.21 UGHD 0 2 net0
> 66.135.192.123 192.168.1.21 UGHD 0 3 net0
> 66.135.192.124 192.168.1.21 UGHD 0 10 net0
> 68.142.226.54 192.168.1.21 UGHD 0 7 net0
> 127.0.0.1 127.0.0.1 UH 12 334279 lo0
> 192.168.0.12 192.168.1.21 UGHD 0 8 net0
> 192.168.1 192.168.1.24 UC 1 0 net0
> 192.168.1.24 127.0.0.1 UGHS 0 0 lo0
> 192.168.2 192.168.1.1 UGS 22 712 net0
> 192.168.3 192.168.1.1 UGS 0 0 net0
> 192.168.3.14 192.168.1.21 UGHD 0 1 net0
> 192.168.4 192.168.1.1 UGS 5 84 net0
> 192.250 192.168.1.28 UGS 0 0 net0
> 192.250.28 192.168.1.28 UGS 0 0 net0
> 192.250.28.66 192.168.1.21 UGHD 0 153 net0
> 207.207.237.232 207.207.237.235 UC 1 0 net1
> 207.207.237.235 127.0.0.1 UGHS 1 6 lo0
> 209.144.44.11 192.168.1.21 UGHD 0 14 net0
> 212 192.168.1.28 UGS 0 0 net0
> 212.67.80.60 192.168.1.21 UGHD 0 17 net0
> 216.109.118.66 192.168.1.21 UGHD 0 12 net0
> 216.178.92.131 192.168.1.21 UGHD 0 2 net0
> 224 192.168.1.24 UCS 0 0 net0

A quick glance suggests all the 192.168.1.21 routes have flags UGHD.
AFAIK the "D" means "dynamically learned". Which means that the
information came over the net either as an ICMP "redirect" from a router
(e.g. from a default gateway such as 192.168.1.28), or from a routing
protocol such as RIP, BGP etc.

Which suggests you should check the config of your routers.

Thanks Brian,

I searched everywhere for entries specify the 1.21 and couldn't find
anything. Funny thing is now the routing tables have no mention of this
server. I guess one of our vendors logged in and found it. Your response
was much appreciated.


>>>We run a Windows Network with web accress via ISA2000 on a proxy server.
>>>Our new proxy server (192.168.1.28) replaces an older unit
>>>(192.168.1.21).
>>>
>>>Our major applications are on SCO 5.05 server whose routing table is
>>>shown below. My static routes to our subnets (192.168.2.0, 192.168.3.0,
>>>192.168.4.0) are added at bootup (/etc/rc2.d/S85.tcp). Whenever the
>>>Unix server is rebooted it looses the internet route for our edi
>>>transmissions and these have to be manually entered so the host can be
>>>found through the new proxy (192.168.1.28). The routing table shows many
>>>routes to the OLD proxy 192.168.1.21. I have cleaned the Windows
>>>servers of all references to the old proxy. How can I find where the
>>>Unix routes through 192.168.1.21 are coming from?
>>>
>>>
>>>Routing tables
>>>Destination Gateway Flags Refs Use Interface
>>>default 192.168.1.28 UGS 2 0 net0
>>>64.178.59.82 192.168.1.28 UGHS 0 0 net0
>>>64.233.161.147 192.168.1.21 UGHD 0 2 net0
>>>66.135.192.123 192.168.1.21 UGHD 0 3 net0
>>>66.135.192.124 192.168.1.21 UGHD 0 10 net0
>>>68.142.226.54 192.168.1.21 UGHD 0 7 net0
>>>127.0.0.1 127.0.0.1 UH 12 334279 lo0
>>>192.168.0.12 192.168.1.21 UGHD 0 8 net0
>>>192.168.1 192.168.1.24 UC 1 0 net0
>>>192.168.1.24 127.0.0.1 UGHS 0 0 lo0
>>>192.168.2 192.168.1.1 UGS 22 712 net0
>>>192.168.3 192.168.1.1 UGS 0 0 net0
>>>192.168.3.14 192.168.1.21 UGHD 0 1 net0
>>>192.168.4 192.168.1.1 UGS 5 84 net0
>>>192.250 192.168.1.28 UGS 0 0 net0
>>>192.250.28 192.168.1.28 UGS 0 0 net0
>>>192.250.28.66 192.168.1.21 UGHD 0 153 net0
>>>207.207.237.232 207.207.237.235 UC 1 0 net1
>>>207.207.237.235 127.0.0.1 UGHS 1 6 lo0
>>>209.144.44.11 192.168.1.21 UGHD 0 14 net0
>>>212 192.168.1.28 UGS 0 0 net0
>>>212.67.80.60 192.168.1.21 UGHD 0 17 net0
>>>216.109.118.66 192.168.1.21 UGHD 0 12 net0
>>>216.178.92.131 192.168.1.21 UGHD 0 2 net0
>>>224 192.168.1.24 UCS 0 0 net0
>>
>>I had to do this - manual edit of a file. Don't remember the file. Found
>>the answer on aplawrence.com- a great resource / consultant....have
>>found many answers to my questions at the site....
>>
>>Regards,
>>TS
>
>
>
> There is an official spot for extra routes, but I almost never see it used
> by others:
> vi /usr/internet/etc/sco_ip/routes
>
> If there is no such file then try this:
> find /etc/rc* /etc/init.d -depth |xargs grep -l "192\.168\.1\.21"
>
> Usually if they even have any extra routes or even a default route for the
> internet,
> it was done by adding commands to /etc/rc.d/8/userdef
> or by adding a new script anywhere in /etc/rc.d/*
> or by adding a new script in /etc/rc2.d with a number higher than 85 so it
> runs after S85tcp
> examples: /etc/rc2.d/S99route, S86route, S99defaultroute, S99gateway,
> S99mycompany
> You'll notice when looking along those lines that there is an
> /etc/rc2.d/S90iproute (really /etc/init.d/iproute)
> That's not an add-on, that's the stock script that reads
> /usr/internet/etc/sco_ip/routes
> Or they edited /etc/tcp (aka /etc/rc2.d/S85tcp)
>
> Basically, since most people were'nt aware of the routes file (or maybe
> before some particular version the S90iproutes script didn't exist yet?) you
> have to browse /etc, /etc/init.d /etc/rc.d and /etc/rc2.d and look for
> things that aren't stock. The above spots, which are all covered by that
> find command, should turn it up though.
>
> Brian K. White -- brian@aljex.com -- http://www.aljex.com/bkw/
> +++++[>+++[>+++++>+++++++<<-]<-]>>+.>.+++++.+++++++.-.[>+<---]>++.
> filePro BBx Linux SCO FreeBSD #callahans Satriani Filk!
>