SEO

#1 (**permalink**) 02-15-2008, 05:42 PM

Hi,

%adapter 0x4000-0x4100 5 - type=ciss ha=0 PCI slot=2 (rev 5.62a)

%bcme0 - 10 - chip=BCM5702 mem=F5FE0000 phy=BCM5703
addr=00:0b:cd:cd:4d:50

%cd-rom - - - type=IDE unit=0 ctlr=pri cfg=mst
dvr=Srom->wd

%disk - - - type=S ha=0 id=0 lun=0 bus=0 ht=ciss unit=0

%Sdsk - - - cyls=8716 hds=255 secs=32 unit=0 fts=stdb

%Sdsk-0 - - - Vnd=HP Prd=LOGICAL VOLUME Rev=1.30

In the above lines is the ht=ciss the btld for the controller? Is there a
definition of all fields available?

Thanks

Brandt

Confidentiality Notice:
The text above and any documents accompanying this email contain
confidential information that is legally privileged. This information
is intended only for the use by the direct addressee(s) of the
original sender. If you are not the intended recipient of the original
sender, you are hereby notified that any disclosure, copying,
distribution, or action taken in reliance on the information is strictly
prohibited. If you have received this email in error, please notify the
PMP Privacy Officer at PRIVACY@PMPTRS.COM and delete any
copies of this email in your possession. Thank You

#2 (**permalink**) 02-15-2008, 05:42 PM

Brandt Eppler wrote:
> Hi,
>
>
>
> %adapter 0x4000-0x4100 5 - type=ciss ha=0 PCI slot=2 (rev 5.62a)
>
> %bcme0 - 10 - chip=BCM5702 mem=F5FE0000 phy=BCM5703
> addr=00:0b:cd:cd:4d:50
>
> %cd-rom - - - type=IDE unit=0 ctlr=pri cfg=mst
> dvr=Srom->wd
>
> %disk - - - type=S ha=0 id=0 lun=0 bus=0 ht=ciss unit=0
>
> %Sdsk - - - cyls=8716 hds=255 secs=32 unit=0 fts=stdb
>
> %Sdsk-0 - - - Vnd=HP Prd=LOGICAL VOLUME Rev=1.30
>
>
>
> In the above lines is the ht=ciss the btld for the controller? Is there a
> definition of all fields available?

What fields specifically are you looking for definitions for?

http://docsrv.sco.com:507/en/man/html.F/mscsi.F.html

gives you most of the scsi definitions.

John

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

SEO

hwconfig question