Hello,

I have some HP DL360G5 machines that we use with OpenBSD. Now we found a
problem when using the onboard NIC's, it works normal when not using rdr
rules that pass for example port 80 traffic to a transparent proxy.
The clients get a blank screen and after a while the squid timeout
message. I was for 200% sure that my configs where ok, i have used them
many many many times. So i put in a new network card that use the em
driver and everything works perfect.

Anyone have simular problems with these cards/servers ?


Here is my dmesg output:

OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz ("GenuineIntel" 686-class)
2.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE, SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
real mem = 3487494144 (3405756K)
avail mem = 3195662336 (3120764K)
using 4278 buffers containing 174497792 bytes (170408K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000,
SMBIOS rev. 2.3 @ 0xee000 (67 entries)
bios0: HP ProLiant DL360 G5
pcibios0 at bios0: rev 3.0 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 9 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6321ESB LPC" rev 0x00)
pcibios0: PCI bus #22 is the last bus
bios0: ROM list: 0xc0000/0xb000 0xcc400/0x4000! 0xd0400/0x1000
0xd1400/0x1000 0xd2400/0x1800 0xe6000/0x2000!
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x25d8
rev 0xb1
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0xb1
pci1 at ppb0 bus 9
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 10
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 11
em0 at pci3 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq
5, address 00:1b:78:57:4e:f4
em1 at pci3 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: irq
7, address 00:1b:78:57:4e:f5
ppb3 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01
pci4 at ppb3 bus 14
ppb4 at pci2 dev 2 function 0 "Intel 6321ESB PCIE" rev 0x01
pci5 at ppb4 bus 15
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 16
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0xb1
pci7 at ppb6 bus 6
ciss0 at pci7 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01: irq 5
ciss0: 1 LD, HW rev 1, FW 2.08/2.08
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.08> SCSI3 0/direct
fixed
sd0: 69973MB, 69973 cyl, 64 head, 32 sec, 512 bytes/sec, 143305920 sec total
ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0xb1
pci8 at ppb7 bus 19
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0xb1
pci9 at ppb8 bus 22
ppb9 at pci0 dev 6 function 0 vendor "Intel", unknown product 0x25e6 rev
0xb1
pci10 at ppb9 bus 2
ppb10 at pci10 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci11 at ppb10 bus 3
bnx0 at pci11 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 10
ppb11 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0xb1
pci12 at ppb11 bus 4
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 5
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: irq 10
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0xb1
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0xb1
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0xb1
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0xb1
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0xb1
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0xb1
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0xb1
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: irq 7
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: irq 5
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb13 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci14 at ppb13 bus 1
vga1 at pci14 dev 3 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x03 at pci14 dev 4 function 0 not configured
"Compaq iLO" rev 0x03 at pci14 dev 4 function 2 not configured
uhci4 at pci14 dev 4 function 4 "Hewlett-Packard USB" rev 0x00: irq 10
usb5 at uhci4: USB revision 1.0
uhub5 at usb5
uhub5: Hewlett-Packard UHCI root hub, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
"Hewlett-Packard IPMI" rev 0x00 at pci14 dev 4 function 6 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, DW-224E-V, C.CA> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ffe5 netmask ffe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub5 port 1 configuration 1 interface 0
uhidev0: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub5 port 1 configuration 1 interface 1
uhidev1: HP Virtual Keyboard, rev 1.10/0.02, addr 2, iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
uhub6 at uhub5 port 2
uhub6: HP Virtual Hub, rev 1.10/0.01, addr 3
uhub6: 7 ports with 7 removable, self powered
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
bnx1: address 00:1b:78:ce:3d:1e
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx0: address 00:1b:78:ce:2d:68
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6