SEO

Hi,

I'm trying to install BSD 3.5 from official CDs distrib
on a "Nec Powermate CT" Box.
The computer reboot by itself befor the end of the install,
few time after the network start :-(
He not alwais crash at the same moment of the process install,
somtime just after the network interface start, somtime (when I
do it faster) during the package copy...
I try to change network cards from 3Com 3C905C-TX-M to Intel
PRO 100 cards without success.
I update the BIOS with latest Nec's V2.32 (Mother board MS 6309)
But it's same !
The computer work fine with Windows XP, but I want to use a real
OS :-)

This is the dmesg output :

OpenBSD 3.5 (RAMDISK_CD) #152: Mon Mar 29 12:41:38 MST 2004
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 869 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC A,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 267956224 (261676K)
avail mem = 242941952 (237248K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/25/02, BIOS32 rev. 0 @ 0xfdae0
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf7600/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C686 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x800 0xd0800/0x800
0xd1000/0x800 0xd1800/0x2800
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C691 PCI" rev 0xc4
ppb0 at pci0 dev 1 function 0 "VIA VT82C598 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce256" rev 0x10
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x22
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x10: ATA66,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <GoldStar, CD-ROM CRD-8484B, 1.03> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x10: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x10: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
"VIA VT82C686 SMBus" rev 0x30 at pci0 dev 7 function 4 not configured
xl0 at pci0 dev 15 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 9
address 00:50:da:4d:1c:4f
exphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 6
xl1 at pci0 dev 16 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 5
address 00:50:da:4c:72:16
exphy1 at xl1 phy 24: Broadcom 3C905C internal PHY, rev. 6
xl2 at pci0 dev 17 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 10
address 00:01:02:b9:20:60
exphy2 at xl2 phy 24: Broadcom 3C905C internal PHY, rev. 6
xl3 at pci0 dev 18 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 9
address 00:01:02:b9:20:6b
exphy3 at xl3 phy 24: Broadcom 3C905C internal PHY, rev. 6
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c440 netmask c660 ttymask c662
rd0: fixed, 3560 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02

Thank you for your answer!

Gauthier Briere a écrit :
> Hi,
>
> I'm trying to install BSD 3.5 from official CDs distrib
> on a "Nec Powermate CT" Box.
> The computer reboot by itself befor the end of the install,
> few time after the network start :-(
> He not alwais crash at the same moment of the process install,
> somtime just after the network interface start, somtime (when I
> do it faster) during the package copy...

It seems that is an IDE or Disk problem.
When I boot from CD and start the CD shell, I can do a lot of things,
but when I try to fsck /dev/wd0a, it crash jus after writing the
Phase 2 -... message

>
> Thank you for your answer!

Another thank for your time !