I can't play any audio files on my system. I have 3.8 release
installed. cat filename > /dev/audio gives no audible output, (tried
multiple files.. .au,txt, ect). System bell and such works fine. My
dmesg is:
--------------------------------------------------------------------------------------------------------------------

OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III Mobile CPU 800MHz ("GenuineIntel"
686-class) 797 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC A,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 133210112 (130088K)
avail mem = 114925568 (112232K)
using 1651 buffers containing 6762496 bytes (6604K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(24) BIOS, date 11/15/01, BIOS32 rev. 0 @
0xfd7e0
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd770/0x890
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev
0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x800 0xdc000/0x4000!
0xe0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82830MP CPU-I/O-1" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82830MP CPU-AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x01: irq
11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x01: irq
11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x01: irq
11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x41
pci2 at ppb1 bus 2
cbb0 at pci2 dev 3 function 0 "Ricoh 5C476 CardBus" rev 0x80: irq 11
cbb1 at pci2 dev 3 function 1 "Ricoh 5C476 CardBus" rev 0x80: irq 11
xl0 at pci2 dev 5 function 0 "3Com 3c556B 100Base-TX" rev 0x20: irq 11,
address 00:00:86:49:59:45
acphy0 at xl0 phy 0: AC101 10/100 PHY, rev. 11
"3Com V.90 Modem" rev 0x20 at pci2 dev 5 function 1 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x01:
SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATCS04-0>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-W28E, 2.1A> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801CA/CAM SMBus" rev 0x01 at pci0 dev 31 function 3 not
configured
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x01: irq
11, ICH3 AC97
ac97: codec id 0x43525936 (Cirrus Logic CS4299 rev 6)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wsdisplay0: screen 5 deleted
wsdisplay0: screen 5 added (80x50, vt100 emulation)
auich0: measured ac97 link rate at 48005 Hz, will use 48000 Hz
---------------------------------------------------------------------------------------------------------------
My mixerctl -a gives:

outputs.master=207,207
outputs.master.mute=off
outputs.mono=255
outputs.mono.mute=off
outputs.mono.source=mixerout
outputs.headphones=255,255
outputs.headphones.mute=off
outputs.bass=255
outputs.treble=255
inputs.speaker=255
inputs.speaker.mute=off
inputs.phone=191
inputs.phone.mute=on
inputs.mic=191
inputs.mic.mute=on
inputs.mic.preamp=off
inputs.mic.source=mic0
inputs.line=191,191
inputs.line.mute=on
inputs.cd=191,191
inputs.cd.mute=on
inputs.video=191,191
inputs.video.mute=on
inputs.aux=191,191
inputs.aux.mute=on
inputs.dac=191,191
inputs.dac.mute=on
record.source=mic
record.volume=255,255
record.volume.mute=on
record.mic=0
record.mic.mute=off
outputs.loudness=off
outputs.spatial=off
outputs.spatial.center=0
outputs.spatial.depth=0
outputs.surround=255,255
outputs.surround.mute=off
outputs.center=255
outputs.center.mute=off
outputs.lfe=255
outputs.lfe.mute=off
-------------------------------------------------------------------------------------------------------------------

Anybody have any suggestions/help?
Very much appreciated.

Brandon

"BTN" <Brandon.Metal@gmail.com> writes:

> I can't play any audio files on my system. I have 3.8 release
> installed. cat filename > /dev/audio gives no audible output, (tried
> multiple files.. .au,txt, ect). System bell and such works fine.

> inputs.line.mute=on
> inputs.cd.mute=on
> inputs.aux.mute=on
> inputs.dac.mute=on

If you mute all your inputs how do you expect to hear anything on the
output?

// marc

Marco S Hyman wrote:
> "BTN" <Brandon.Metal@gmail.com> writes:
>
> > I can't play any audio files on my system. I have 3.8 release
> > installed. cat filename > /dev/audio gives no audible output, (tried
> > multiple files.. .au,txt, ect). System bell and such works fine.
>
> > inputs.line.mute=on
> > inputs.cd.mute=on
> > inputs.aux.mute=on
> > inputs.dac.mute=on
>
> If you mute all your inputs how do you expect to hear anything on the
> output?
>
> // marc
They all read "off" now.

inputs.line.mute=off
inputs.cd.mute=off
inputs.aux.mute=off
inputs.dac.mute=off

Still no luck though.

Sorry, I missed:

inputs.aux.mute=on --->off

works now.