SEO
vBulletin Search Engine Optimization
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
02-22-2008, 11:57 AM
| ||||
| ||||
 Re: patch: make HP Smart Array P600 with SAS drives work with ciss On Wed, Nov 23, 2005 at 03:27:24PM +0100, Srebrenko Sehic wrote: > The patch below makes OpenBSD 3.8/i386 work on HP DL360 G4 with SAS > drives. The machine has a P600 controller on the board, but it > apparently has a different version than the one supported by the > current driver. Hence, I've simply bumped the CISS_VERSION in > cissreg.h to 3 (quick hack). I've also included a patch to pcidevs > which makes the integrated lights-out processor recognizable (i > believe this is already in -current). > > dmesg is at the end of the message commited. > As reported in PR4595 > (http://cvs.openbsd.org/cgi-bin/query...&numbers=4595), > the performance is not quite good. I've also tried the latest revision > of ciss.c (r1.8). No difference. not god is being what? and doing what? and what configuration? > Index: ic/cissreg.h > ================================================== ================= > RCS file: /cvs/src/sys/dev/ic/cissreg.h,v > retrieving revision 1.1 > diff -u -r1.1 cissreg.h > --- ic/cissreg.h 2005/07/06 01:52:13 1.1 > +++ ic/cissreg.h 2005/11/23 14:05:16 > @@ -51,7 +51,7 @@ > u_int32_t signature; > #define CISS_SIGNATURE (*(u_int32_t *)"CISS") > u_int32_t version; > -#define CISS_VERSION 1 > +#define CISS_VERSION 3 > u_int32_t methods; > #define CISS_METH_READY 0x0001 > #define CISS_METH_SIMPL 0x0002 > Index: pci/ciss_pci.c > ================================================== ================= > RCS file: /cvs/src/sys/dev/pci/ciss_pci.c,v > retrieving revision 1.5 > diff -u -r1.5 ciss_pci.c > --- pci/ciss_pci.c 2005/08/09 04:10:10 1.5 > +++ pci/ciss_pci.c 2005/11/23 14:05:17 > @@ -61,6 +61,7 @@ > { PCI_VENDOR_HP, PCI_PRODUCT_HP_HPSAV100 }, > { PCI_VENDOR_HP, PCI_PRODUCT_HP_HPSAP800 }, > { PCI_VENDOR_HP, PCI_PRODUCT_HP_HPSAP600 }, > + { PCI_VENDOR_HP, PCI_PRODUCT_HP_HPSASP600 }, > { PCI_VENDOR_HP, PCI_PRODUCT_HP_HPSAE400 }, > }; > #define CISS_PCI_NDEVS sizeof(ciss_pci_devices)/sizeof(ciss_pci_devices[0]) > Index: pci/pcidevs > ================================================== ================= > RCS file: /cvs/src/sys/dev/pci/pcidevs,v > retrieving revision 1.910 > diff -u -r1.910 pcidevs > --- pci/pcidevs 2005/08/29 03:00:23 1.910 > +++ pci/pcidevs 2005/11/23 14:05:19 > @@ -1036,6 +1036,8 @@ > product COMPAQ CSA5i_2 0xb178 Smart Array 5i/532 rev.2 > product COMPAQ NF3P 0xf130 NetFlex 3/P > product COMPAQ NF3P_BNC 0xf150 NetFlex 3/PB > +product COMPAQ ILOA 0xb203 Integrated Lights-Out Processor > +product COMPAQ ILOB 0xb204 Integrated Lights-Out Processor > > /* Compex */ > product COMPEX COMPEXE 0x1401 Compexe > @@ -1278,6 +1280,7 @@ > product HP QUICKSILVER 0x12b4 QuickSilver Ropes-PCI > product HP HPSAV100 0x3210 Smart Array V100 > product HP HPSAP800 0x3223 Smart Array P800 > +product HP HPSASP600 0x3220 Smart Array P600 > product HP HPSAP600 0x3225 Smart Array P600 > product HP HPSAE400 0x3231 Smart Array E400 > > Index: pci/pcidevs.h > ================================================== ================= > RCS file: /cvs/src/sys/dev/pci/pcidevs.h,v > retrieving revision 1.911 > diff -u -r1.911 pcidevs.h > --- pci/pcidevs.h 2005/08/29 03:00:49 1.911 > +++ pci/pcidevs.h 2005/11/23 14:05:22 > @@ -1041,6 +1041,8 @@ > #define PCI_PRODUCT_COMPAQ_CSA5i_2 0xb178 /* Smart Array 5i/532 rev.2 */ > #define PCI_PRODUCT_COMPAQ_NF3P 0xf130 /* NetFlex 3/P */ > #define PCI_PRODUCT_COMPAQ_NF3P_BNC 0xf150 /* NetFlex 3/PB */ > +#define PCI_PRODUCT_COMPAQ_ILOA 0xb203 /* Integrated Lights-Out Processor */ > +#define PCI_PRODUCT_COMPAQ_ILOB 0xb204 /* Integrated Lights-Out Processor */ > > /* Compex */ > #define PCI_PRODUCT_COMPEX_COMPEXE 0x1401 /* Compexe */ > @@ -1282,6 +1284,7 @@ > #define PCI_PRODUCT_HP_MERCURY 0x122e /* Mercury Ropes-PCI */ > #define PCI_PRODUCT_HP_QUICKSILVER 0x12b4 /* QuickSilver Ropes-PCI */ > #define PCI_PRODUCT_HP_HPSAV100 0x3210 /* Smart Array V100 */ > +#define PCI_PRODUCT_HP_HPSASP600 0x3220 /* Smart Array P600 */ > #define PCI_PRODUCT_HP_HPSAP800 0x3223 /* Smart Array P800 */ > #define PCI_PRODUCT_HP_HPSAP600 0x3225 /* Smart Array P600 */ > #define PCI_PRODUCT_HP_HPSAE400 0x3231 /* Smart Array E400 */ > Index: pci/pcidevs_data.h > ================================================== ================= > RCS file: /cvs/src/sys/dev/pci/pcidevs_data.h,v > retrieving revision 1.910 > diff -u -r1.910 pcidevs_data.h > --- pci/pcidevs_data.h 2005/08/29 03:00:49 1.910 > +++ pci/pcidevs_data.h 2005/11/23 14:05:25 > @@ -2451,6 +2451,14 @@ > "QVision", > }, > { > + PCI_VENDOR_COMPAQ, PCI_PRODUCT_COMPAQ_ILOA, > + "Integrated Lights-Out Processor", > + }, > + { > + PCI_VENDOR_COMPAQ, PCI_PRODUCT_COMPAQ_ILOB, > + "Integrated Lights-Out Processor", > + }, > + { > PCI_VENDOR_COMPAQ, PCI_PRODUCT_COMPAQ_TRIFLEX4, > "Triflex PCI", > }, > @@ -3260,6 +3268,10 @@ > }, > { > PCI_VENDOR_HP, PCI_PRODUCT_HP_HPSAP600, > + "Smart Array P600", > + }, > + { > + PCI_VENDOR_HP, PCI_PRODUCT_HP_HPSASP600, > "Smart Array P600", > }, > { > > -- dmesg.dl360 g4 > OpenBSD 3.8-stable (GENERIC) #5: Wed Nov 23 14:57:30 CET 2005 > root@build-2-i386.lab.armorlogic.com:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel(R) Xeon(TM) CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE 2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,CNXT-ID > cpu0: Enhanced SpeedStep 1700 MHz (1404 mV): unknown EST cpu, no > changes possible > real mem = 2147012608 (2096692K) > avail mem = 1953103872 (1907328K) > using 4278 buffers containing 107454464 bytes (104936K) of memory > mainbus0 (root) > bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000 > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000 > pcibios0: PCI BIOS has 7 Interrupt Routing table entries > pcibios0: no compatible PCI ICU found > pcibios0: Warning, unable to fix up PCI interrupt routing > pcibios0: PCI bus #7 is the last bus > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x1600 0xee000/0x2000! > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x0c > ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x0c > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 4 function 0 "Intel E7710 MCH PCIE" rev 0x0c > pci2 at ppb1 bus 2 > ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09 > pci3 at ppb2 bus 3 > ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09 > pci4 at ppb3 bus 4 > ciss0 at pci4 dev 1 function 0 "Hewlett-Packard Smart Array P600" rev > 0x00: irq 5 > ciss0: 1 LD HW rev 0 FW 1.16/1.16 > lmap 40000000:0 scsibus0 at ciss0: 1 targets > sd0 at scsibus0 targ 0 lun 0: <COMPAQ, LOGICAL VOLUME, 1.16> SCSI0 > 0/direct fixed > ciss0: cmd_stat 2 scsi_stat 0x0 > ciss0: cmd_stat 2 scsi_stat 0x0 > sd0: 69399MB, 69399 cyl, 64 head, 32 sec, 512 bytes/sec, 142130880 sec total > ppb4 at pci0 dev 6 function 0 "Intel E7710 MCH PCIE" rev 0x0c > pci5 at ppb4 bus 5 > ppb5 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02 > pci6 at ppb5 bus 6 > bge0 at pci6 dev 2 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 > (0x2100): irq 5 address 00:14:38:4f:d9:50 > brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 > bge1 at pci6 dev 2 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 > (0x2100): irq 5 address 00:14:38:4f:d9:4f > brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 > uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 5 > usb0 at uhci0: USB revision 1.0 > uhub0 at usb0 > uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1 at pci0 dev 29 function 1 "Intel 5300ESB USB" rev 0x02: irq 5 > usb1 at uhci1: USB revision 1.0 > uhub1 at usb1 > uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > "Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured > "Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured > ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 5 > usb2 at ehci0: USB revision 2.0 > uhub2 at usb2 > uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1 > uhub2: 4 ports with 4 removable, self powered > ppb6 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a > pci7 at ppb6 bus 7 > vga1 at pci7 dev 3 function 0 "ATI Rage XL" rev 0x27 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > "Compaq Integrated Lights-Out Processor" rev 0x01 at pci7 dev 4 > function 0 not configured > "Compaq Integrated Lights-Out Processor" rev 0x01 at pci7 dev 4 > function 2 not configured > ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02 > pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 2.03> SCSI0 > 5/cdrom removable > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 > pciide0: channel 1 disabled (no drives) > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > sysbeep0 at pcppi0 > npx0 at isa0 port 0xf0/16: using exception 16 > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > biomask efe5 netmask efe5 ttymask ffe7 > pctr: user-level cycle counter enabled > ciss0: cmd_stat 2 scsi_stat 0x0 > ciss0: cmd_stat 2 scsi_stat 0x0 > dkcsum: sd0 matches BIOS drive 0x80 > root on sd0a > ciss0: cmd_stat 2 scsi_stat 0x0 > ciss0: cmd_stat 2 scsi_stat 0x0 > ciss0: cmd_stat 2 scsi_stat 0x0 > ciss0: cmd_stat 2 scsi_stat 0x0 > rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 > ciss0: cmd_stat 2 scsi_stat 0x0 > ciss0: cmd_stat 2 scsi_stat 0x0 > ciss0: cmd_stat 2 scsi_stat 0x0 > ciss0: cmd_stat 2 scsi_stat 0x0 > -- paranoic mickey (my employers have changed but, the name has remained)      |
Linear Mode
