SEO

Brad wrote:
> On Fri, Jun 23, 2006 at 02:41:17AM -0400, sahil.cooner@gmail.com wrote:
>
>> To Whom It May Concern,
>>
>> This is my first posting to tech. I have just recently started using
>> openbsd and really enjoy the project. I have definitely started delving
>> into the source code as of recent as things such as the microsoft
>> optical mouse are non functional, so I thought i would start hacking
>> away at usbhiddev.h (from memory).
>>
>> Long story short, I have a zyxel gn670 card and I see that both 32-bit &
>> 64-bit are supported under vge interface. I popped in 3.9 cd of openbsd
>> which did not detect this device. I was wondering if anyone has any
>> experience with this device? or if it has any issues. The gigabit card
>> is important to me as I will be hosting files off this server via NIS/NFS.
>>
>> --neuro
>>
>
> Please send me the output of dmesg with the adapter in the system.
>
>
OpenBSD 3.9-current (RAMDISK_CD) #1190: Thu Jun 22 19:55:38 MDT 2006
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 1.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC A,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 133771264 (130636K)
avail mem = 116719616 (113984K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c3) BIOS, date 12/29/00, BIOS32 rev. 0 @
0xf09c0, SMBIOS rev. 2.3 @ 0xf1e80 (42 entries)
bios0: 00101170 7870 15306003031056
apm0 at bios0: Power Management spec V1.2
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x9212
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf9140/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xb400 0xcc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02: rng active,
366Kb/sec
ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce2 MX" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci2 at ppb1 bus 2
"Broadcom BCM4306" rev 0x02 at pci2 dev 11 function 0 not configured
rl0 at pci2 dev 13 function 0 "Realtek 8139" rev 0x10: irq 9, address
00:e0:18:ce:44:d3
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340823A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 6B200P0>
wd1: 16-sector PIO, LBA48, 194481MB, 398297088 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CR-48X5TE, 1.4A> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1502, 1808> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801AA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
"Intel 82801AA AC97" rev 0x02 at pci0 dev 31 function 5 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffe5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
uhub1 at uhub0 port 2
uhub1: ALCOR Generic USB Hub, rev 1.10/1.00, addr 2
uhub1: 4 ports with 4 removable, self powered
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft Trackball Optical\M-., rev 1.10/1.21, addr
3, iclass 3/1
uhid at uhidev0 not configured
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
OpenBSD 3.9-current (RAMDISK_CD) #1190: Thu Jun 22 19:55:38 MDT 2006
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 1.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC A,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 133771264 (130636K)
avail mem = 116719616 (113984K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c3) BIOS, date 12/29/00, BIOS32 rev. 0 @
0xf09c0, SMBIOS rev. 2.3 @ 0xf1e80 (42 entries)
bios0: 00101170 7870 15306003031056
apm0 at bios0: Power Management spec V1.2
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x9212
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf9140/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xb400 0xcc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02: rng active,
369Kb/sec
ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce2 MX" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci2 at ppb1 bus 2
"Broadcom BCM4306" rev 0x02 at pci2 dev 11 function 0 not configured
rl0 at pci2 dev 13 function 0 "Realtek 8139" rev 0x10: irq 9, address
00:e0:18:ce:44:d3
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340823A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 6B200P0>
wd1: 16-sector PIO, LBA48, 194481MB, 398297088 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CR-48X5TE, 1.4A> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1502, 1808> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801AA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
"Intel 82801AA AC97" rev 0x02 at pci0 dev 31 function 5 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffe5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
uhub1 at uhub0 port 2
uhub1: ALCOR Generic USB Hub, rev 1.10/1.00, addr 2
uhub1: 4 ports with 4 removable, self powered
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft Trackball Optical\M-., rev 1.10/1.21, addr
3, iclass 3/1
uhid at uhidev0 not configured
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
syncing disks...
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 1.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC A,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 133783552 (130648K)
avail mem = 115351552 (112648K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c3) BIOS, date 12/29/00, BIOS32 rev. 0 @ 0xf09c0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x9212
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf9140/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xb400 0xcc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x02: rng active,
368Kb/sec
ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce2 MX" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci2 at ppb1 bus 2
"Broadcom BCM4306" rev 0x02 at pci2 dev 11 function 0 not configured
rl0 at pci2 dev 13 function 0 "Realtek 8139" rev 0x10: irq 9, address
00:e0:18:ce:44:d3
rlphy0 at rl0 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340823A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 6B200P0>
wd1: 16-sector PIO, LBA48, 194481MB, 398297088 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CR-48X5TE, 1.4A> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1502, 1808> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichiic0 at pci0 dev 31 function 3 "Intel 82801AA SMBus" rev 0x02: irq 9
iic0 at ichiic0
"unknown" at iic0 addr 0x18 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801AA AC97" rev 0x02: irq 9,
ICH AC97
ac97: codec id 0x43525934 (Cirrus Logic CS4299 rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff65 netmask ff65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhub1 at uhub0 port 2
uhub1: ALCOR Generic USB Hub, rev 1.10/1.00, addr 2
uhub1: 4 ports with 4 removable, self powered
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft Trackball Optical\M-., rev 1.10/1.21, addr
3, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

--------------------------------------------------------------------------------------------
as you can see my dmesg does not pick up anything