SEO

Hi neuro,

> I was wondering if anyone
> has any experience with this device? or if it has any issues.

Here's one I use on 3.8-stable (full dmesg). I've started using these
cards since Linksys' EG1032 adapters (ver3 onwards, I believe) started
having unsupported chipsets (Thank you, Linksys!).

Luckily, I have one hell of a dealer for ZyXEL equipment. :-) No issues
at all so far.

HTH... Nico

OpenBSD 3.8-stable (GENERIC) #3: Tue Dec 27 14:17:17 CET 2005
root@xxxxxx.intern:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 1.50GHz ("GenuineIntel" 686-class) 1.50
GHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE 2,SS,HTT,TM
real mem = 267952128 (261672K) avail mem = 237613056 (232044K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(86) BIOS, date 09/26/01, BIOS32 rev. 0 @
0xfb190 apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/192 (10 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xbc00
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xb2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x12
pci2 at ppb1 bus 2
uhci0 at pci2 dev 5 function 0 "VIA VT83C572 USB" rev 0x50: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci2 dev 5 function 1 "VIA VT83C572 USB" rev 0x50: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci2 dev 5 function 2 "VIA VT6202 USB" rev 0x51: irq 11
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
vge0 at pci2 dev 10 function 0 "VIA VT612x" rev 0x11: irq 11, address
00:a0:c5:30:ca:c8 ciphy0 at vge0 phy 1: Cicada CS8201 10/100/1000TX PHY,
rev. 1 ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x12
pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x12: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at
pciide0 channel 0 drive 0: <DEONET TAPELESS V.26.B10> wd0: 16-sector PIO,
LBA48, 194481MB, 398297088 sectors wd0(pciide0:0:0): using PIO mode 4,
Ultra-DMA mode 5 wd1 at pciide0 channel 1 drive 1: <Maxtor 6Y080L0>
wd1: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
uhci2 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x12: irq 11
usb3 at uhci2: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
"Intel 82801BA SMBus" rev 0x12 at pci0 dev 31 function 3 not configured
uhci3 at pci0 dev 31 function 4 "Intel 82801BA USB" rev 0x12: irq 12
usb4 at uhci3: USB revision 1.0
uhub4 at usb4
uhub4: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff65 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
wd1: no disk label
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302