SEO

Hi,

I'm not sure if this is the right list, please redirect me if I'm wrong
here.

I tried today to install OpenBSD-current on a new machine with a Tyan
Tiger i7320 mainboard (
http://tyan.com/products/html/tigeri7320_spec.html , I actually chose
this board after seeing that the 6300ESB chipset was supported.)

I have two SATA disks connected and set up as RAID1 in the BIOS.
Installation fails because no hard drive is found (I've tried the
cd36.iso snapshot from Feb, 18th).

I guess the problem is the "vendor "Intel", unknown product 0x25b0".
/usr/src/sys/dev/pci/pcidefs only lists product ids up to 0x25ae.
http://pciids.sourceforge.net/iii/?m=1:i=8086 shows 0x25b0 as "6300ESB
SATA RAID Controller".

Any idea about this? Would it possibly work if I add appropriate "case
0x25b0" statements everywhere in pciide.c where
PCI_PRODUCT_INTEL_6300ESB_SATA is used? (I have no idea where I could
get documentation for this). What is the fastest way to create a
cd36.iso for testing? (I've read release(8), but is there an easy way
to just create the boot CD/floppies without having to build the whole
release?)

Thanks and best regards,
Marc

dmesg:
OpenBSD 3.6-current (RAMDISK_CD) #544: Fri Feb 18 18:49:44 MST 2005
pvalchev@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,
CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,PNI,MW AIT,CNXT-ID
real mem = 535838720 (523280K)
avail mem = 483405824 (472076K)
using 4278 buffers containing 26894336 bytes (26264K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(e7) BIOS, date 11/08/04, BIOS32 rev. 0 @
0xfd62a
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev 3.0 @ 0xfd2c0/0xd40
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde30/432 (25 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev
0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x3592
rev 0x0a
ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x0a
pci1 at ppb0 bus 1
bge0 at pci1 dev 0 function 0 "Broadcom BCM5721" rev 0x11, unknown
BCM5750: irq 5 address 00:e0:81:2e:18:be
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 3 function 0 "Intel E7710 MCH PCIE" rev 0x0a
pci2 at ppb1 bus 2
bge1 at pci2 dev 0 function 0 "Broadcom BCM5721" rev 0x11, unknown
BCM5750: irq 5 address 00:e0:81:2e:18:bf
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 5300ESB USB" rev 0x02: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: irq 10
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb3 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x0a
pci4 at ppb3 bus 4
vga1 at pci4 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8163B, 0L23> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
vendor "Intel", unknown product 0x25b0 (class mass storage subclass
RAID, rev 0x02) at pci0 dev 31 function 2 not configured
"Intel 6300ESB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ffe5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02