SEO

#1 (**permalink**) 01-05-2008, 10:07 AM

I Just Installed A 9.1 GB SCSI Hard Drive In My RS/6000 Model 140 P43.

- The BIOS Is Showing The Hard Drive Size = ????
- The AIX 4.3.3 & 5.1 BOS Installation CD Shows Size = 0

Can Any One Help Me Fix This Problem.
I Was Able To Us The Format Command On Solaris To Setup
The Same Model Drive On My Sun SparcStation 5.

Help Please

#2 (**permalink**) 01-05-2008, 10:07 AM

IIRC under diag, there's a format option.
Ken
"wfitzpatrick" <fitzpatrick.williamd@gmail.com> wrote in message
news:1154609585.536340.174710@p79g2000cwp.googlegr oups.com...
>I Just Installed A 9.1 GB SCSI Hard Drive In My RS/6000 Model 140 P43.
>
> - The BIOS Is Showing The Hard Drive Size = ????
> - The AIX 4.3.3 & 5.1 BOS Installation CD Shows Size = 0
>
> Can Any One Help Me Fix This Problem.
> I Was Able To Us The Format Command On Solaris To Setup
> The Same Model Drive On My Sun SparcStation 5.
>
> Help Please
>

#3 (**permalink**) 01-05-2008, 10:07 AM

In article <1154609585.536340.174710@p79g2000cwp.googlegroups .com>, wfitzpatrick <fitzpatrick.williamd@gmail.com> wrote:
> I Just Installed A 9.1 GB SCSI Hard Drive In My RS/6000 Model 140 P43.
>
> - The BIOS Is Showing The Hard Drive Size = ????
> - The AIX 4.3.3 & 5.1 BOS Installation CD Shows Size = 0

Sounds like a failed drive to me? If using used drives, best to get
one that is 4 years old or less.

-Dan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

SEO

Assistance Needed - Hardware Installation Issue