SEO

We have an old pSeries 615 system and, after a power failure, have
problems booting it. The serial console gives the following codes:
9022
9101
90FD
10117611 U0.1-F1
B0FF
91CA
91CE

After this, the system pauses for awhile and then returns to the "SYSTEM
POWER CONTROL MENU" menu. We have had the following problems on the
system, which leads me to believe the CPU died:
20D09001: Refer to the Error Code to FRU Index in the system service
guide.
Error log information:
Date: Thu Feb 28 14:03:16 UTC 2008
Sequence number: 17951
Label: SCAN_ERROR_CHRP
FRU: n/a U0.0-P1

A10-100: The following resource is unavailable due to an error. System
is operating in degraded mode.
Error log information:
Date: Thu Feb 28 06:05:48 UTC 2008
Sequence number: 17941
Label: SCAN_ERROR_CHRP
n/a FRU: 80P2757 U0.1-P1

A0D-330: Array or Logic Built in Self Test Error
Error log information:
Date: Thu Feb 28 05:23:20 UTC 2008
Sequence number: 17922
Label: SCAN_ERROR_CHRP
n/a FRU: 80P2757 U0.1-P1

A11-580: Recoverable errors on a processor indicate a potential for an
unrecoverable error. The resource cannot be deconfigured and is
still in use. The problem may be corrected by array bit
steering. Use map 0235.
Error log information:
Date: Wed Feb 27 18:58:18 UTC 2008
Sequence number: 17896
Label: CPU_FAIL_PREDICTED
proc0 FRU: 80P2757 U0.1-P1
Processor

I'm thinking of just replacing the CPU and crossing my fingers that it
will correct the problem.

Anyone with any ideas?

--
albert chin (china @at@ thewrittenword .dot. com)