SEO

I have a problem on an AIX server. We use a set of scripts to do
monitoring and maintenance chores on some AIX servers that contain our
Oracle databases. On one server, the scripts run fine. On another,
they do not.
The scripts do not call the other scripts even though the scripts are
the same. I used the set -x option to try to debug it, and discovered
that the scripts were not being called.
This is from the log file of the server that the scripts fail on:

+ Logger StartLogging twtm02_rman_cold_backup_tape.ksh twtm02
+ Logger printStartOfJobMessage twtm02_rman_cold_backup_tape.ksh
+ [ 5 -lt 3 ]
+ typeset -l sid mediaType startOnErr
+ typeset tag parms
+ export mediaType=tape
+ export sid=twtm02
+ export startOnErr=yes
+ export tag=Cold_Backup_UAT
+ export params=filesperset=16
+ ScriptVariables setAndExport sid=twtm02
+ ScriptVariables setAndExport mediaType=tape
+ ScriptVariables setAndExport startOnErr=yes
+ ScriptVariables setAndExport tag=Cold_Backup_UAT
+ ScriptVariables setAndExport params=filesperset=16
+ . twtm02_setup.ksh
+ typeset dbaScript

Now, that same script ran successfully on a different server:
+ Logger printStartOfJobMessage dwtm03_rman_cold_backup_tape.ksh

dwtm03_rman_cold_backup_tape.ksh is starting on 2007/02/07 01:30:01

+ [ 5 -lt 3 ]
+ typeset -l sid mediaType startOnErr
+ typeset tag parms
+ ScriptVariables setAndExport sid=dwtm03
setVariable: sid=dwtm03
+ ScriptVariables setAndExport mediaType=tape
setVariable: mediaType=tape
+ ScriptVariables setAndExport startOnErr=yes
setVariable: startOnErr=yes
+ ScriptVariables setAndExport tag=Cold_Backup_DEV
setVariable: tag=Cold_Backup_DEV
+ ScriptVariables setAndExport params=filesperset=16
setVariable: params=filesperset=16
+ . dwtm03_setup.ksh
+ typeset dbaScript
+ regFunc initScript dwtm03_setup.ksh dwtm03 tape yes Cold_Backup_DEV
filesperse
t=16

Entering Script dwtm03_setup.ksh on 02/07/2007 01:30:01

The function ScriptVariables is called on the bad , server, uhda04 ,
and does not execute. Thus the env. variables are not set. On the good
server, uhda01, the ScriptVariables function executes fine and sets
the environment variable. On uhda04, I had to explicitly put the
export command in to get the env. variables set properly. Even so, the
script does not call other scripts.

When I ran ulimit, I received the following:
[uhda01:dwtm03][oracle][/oracle/app/admin/bin]>ulimit -a
ulimit -a
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) 131072
stack(kbytes) 32768
memory(kbytes) 32768
coredump(blocks) 2097151
nofiles(descriptors) 2000
[uhda01:dwtm03][oracle][/oracle/app/admin/bin]>which ksh
which ksh
/bin/ksh

When I run the same commands on uhda04:[uhda04:twtm02][oracle][/oracle/
app/admin/bin]>ulimit -a
ulimit -a
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) 131072
stack(kbytes) 32768
memory(kbytes) 32768
coredump(blocks) 2097151
nofiles(descriptors) 2000
[uhda04:twtm02][oracle][/oracle/app/admin/bin]>which ksh
which ksh
/bin//ksh
[uhda04:twtm02][oracle][/oracle/app/admin/bin]>

The userid used on both servers is oracle. The version of AIX is
4.3.3. The called programs and functions do not seem to be executed.

Anyone have any ideas?

RWB

On Feb 7, 5:04 pm, reginald.w.bai...@jpmchase.com wrote:
> I have a problem on an AIX server. We use a set of scripts to do
> monitoring and maintenance chores on some AIX servers that contain our
> Oracle databases. On one server, the scripts run fine. On another,
> they do not.
> The scripts do not call the other scripts even though the scripts are
> the same. I used the set -x option to try to debug it, and discovered
> that the scripts were not being called.
> This is from the log file of the server that the scripts fail on:
>
> + Logger StartLogging twtm02_rman_cold_backup_tape.ksh twtm02
> + Logger printStartOfJobMessage twtm02_rman_cold_backup_tape.ksh
> + [ 5 -lt 3 ]
> + typeset -l sid mediaType startOnErr
> + typeset tag parms
> + export mediaType=tape
> + export sid=twtm02
> + export startOnErr=yes
> + export tag=Cold_Backup_UAT
> + export params=filesperset=16
> + ScriptVariables setAndExport sid=twtm02
> + ScriptVariables setAndExport mediaType=tape
> + ScriptVariables setAndExport startOnErr=yes
> + ScriptVariables setAndExport tag=Cold_Backup_UAT
> + ScriptVariables setAndExport params=filesperset=16
> + . twtm02_setup.ksh
> + typeset dbaScript
>
> Now, that same script ran successfully on a different server:
> + Logger printStartOfJobMessage dwtm03_rman_cold_backup_tape.ksh
>
> dwtm03_rman_cold_backup_tape.ksh is starting on 2007/02/07 01:30:01
>
> + [ 5 -lt 3 ]
> + typeset -l sid mediaType startOnErr
> + typeset tag parms
> + ScriptVariables setAndExport sid=dwtm03
> setVariable: sid=dwtm03
> + ScriptVariables setAndExport mediaType=tape
> setVariable: mediaType=tape
> + ScriptVariables setAndExport startOnErr=yes
> setVariable: startOnErr=yes
> + ScriptVariables setAndExport tag=Cold_Backup_DEV
> setVariable: tag=Cold_Backup_DEV
> + ScriptVariables setAndExport params=filesperset=16
> setVariable: params=filesperset=16
> + . dwtm03_setup.ksh
> + typeset dbaScript
> + regFunc initScript dwtm03_setup.ksh dwtm03 tape yes Cold_Backup_DEV
> filesperse
> t=16
>
> Entering Script dwtm03_setup.ksh on 02/07/2007 01:30:01
>
> The function ScriptVariables is called on the bad , server, uhda04 ,
> and does not execute. Thus the env. variables are not set. On the good
> server, uhda01, the ScriptVariables function executes fine and sets
> the environment variable. On uhda04, I had to explicitly put the
> export command in to get the env. variables set properly. Even so, the
> script does not call other scripts.
>
> When I ran ulimit, I received the following:
> [uhda01:dwtm03][oracle][/oracle/app/admin/bin]>ulimit -a
> ulimit -a
> time(seconds) unlimited
> file(blocks) unlimited
> data(kbytes) 131072
> stack(kbytes) 32768
> memory(kbytes) 32768
> coredump(blocks) 2097151
> nofiles(descriptors) 2000
> [uhda01:dwtm03][oracle][/oracle/app/admin/bin]>which ksh
> which ksh
> /bin/ksh
>
> When I run the same commands on uhda04:[uhda04:twtm02][oracle][/oracle/
> app/admin/bin]>ulimit -a
> ulimit -a
> time(seconds) unlimited
> file(blocks) unlimited
> data(kbytes) 131072
> stack(kbytes) 32768
> memory(kbytes) 32768
> coredump(blocks) 2097151
> nofiles(descriptors) 2000
> [uhda04:twtm02][oracle][/oracle/app/admin/bin]>which ksh
> which ksh
> /bin//ksh
> [uhda04:twtm02][oracle][/oracle/app/admin/bin]>
>
> The userid used on both servers is oracle. The version of AIX is
> 4.3.3. The called programs and functions do not seem to be executed.
>
> Anyone have any ideas?
>
> RWB

got

#!/bin/ksh

at the top of the script ?

have explict paths to files?