SEO

#1 (**permalink**) 01-04-2008, 09:39 PM

I do backups of an ssa array by unmounting the filesystem and running
a backup using aix 'backup' command - everything works fine. I try to
restore on a different system using 'restore -f/dev/rmt0.1 -i' I
consistantly get not enough memory to complete this operation. I have
also tried just doing a
'cp -R /raid5 /nfs-mount' and I get the same errors. Both tape drives
are the same - the OS level is the same aix 4.3. Ive tried usning
different backup options. The block size is the same on both
devices... I just cannot do a restore - any ideas what to do next?

Thanks in advance

Ted Fiedler

#2 (**permalink**) 01-04-2008, 09:39 PM

Ted Fiedler <fiedler@uic.com> wrote:
TF> I do backups of an ssa array by unmounting the filesystem and running
TF> a backup using aix 'backup' command - everything works fine. I try to
TF> restore on a different system using 'restore -f/dev/rmt0.1 -i' I
TF> consistantly get not enough memory to complete this operation. I have
TF> also tried just doing a
TF> 'cp -R /raid5 /nfs-mount' and I get the same errors. Both tape drives
TF> are the same - the OS level is the same aix 4.3. Ive tried usning
TF> different backup options. The block size is the same on both
TF> devices... I just cannot do a restore - any ideas what to do next?

http://xrl.us/bhdn [1]

Regards,

Nicholas

[1] http://groups.google.com/groups?q=in... le.com&rnum=1

--
http://www.faqs.org/rfcs/rfc1855.html
3.1.1 General Guidelines for mailing lists and NetNews
3.1.3 NetNews Guidelines

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

SEO

memory errors using restore