vBulletin Search Engine Optimization
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| ||||
| Having some problems booting off of my original "hd5" after booting off "bos_hd5": ibmsbx3 # bootlist -m normal -o hdisk4 ibmsbx3 # bootlist -v -m normal hdisk4 blv=hd5 'ibm,max-boot-devices' = 0x5 Processing fcp device Found fcp parent of fcp device bootinfo partition nmbr = 3 boot list for device: '/pci@400000000111/pci@2/fibre-channel@1/disk@5006048accc861ef,6000000000000:2' Setting NVRAM variable: (boot-device=/pci@400000000111/pci@2/fibre-channel@1/disk@5006048accc861ef,6000000000000:2) Setting NVRAM variable: (boot-file=) Setting NVRAM variable: (boot-command=boot) Setting NVRAM variable: (bootinfo-aix=/pci@400000000111/pci@2/fibre-channel@1/disk@5006048accc861ef,6000000000000:3) Setting NVRAM variable: (ibm,aix-fc-bootinfo=) ibmsbx3 # bootlist -m normal -o hdisk4 *** should say *** ibmsbx3 # bootlist -m normal -o hdisk4 blv=hd5 When I reboot the machine (via "shutdown -Fr"), it boots off of "bos_hd5" again... Any thoughts? -Chris |
| ||||
| cmstan2002@gmail.com wrote: > Having some problems booting off of my original "hd5" after booting off > "bos_hd5": > > ibmsbx3 # bootlist -m normal -o > hdisk4 > ibmsbx3 # bootlist -v -m normal hdisk4 blv=hd5 > 'ibm,max-boot-devices' = 0x5 > Processing fcp device > Found fcp parent of fcp device > bootinfo partition nmbr = 3 > boot list for device: > '/pci@400000000111/pci@2/fibre-channel@1/disk@5006048accc861ef,6000000000000:2' > Setting NVRAM variable: > (boot-device=/pci@400000000111/pci@2/fibre-channel@1/disk@5006048accc861ef,6000000000000:2) > Setting NVRAM variable: (boot-file=) > Setting NVRAM variable: (boot-command=boot) > Setting NVRAM variable: > (bootinfo-aix=/pci@400000000111/pci@2/fibre-channel@1/disk@5006048accc861ef,6000000000000:3) > Setting NVRAM variable: (ibm,aix-fc-bootinfo=) > ibmsbx3 # bootlist -m normal -o > hdisk4 > > *** should say *** > ibmsbx3 # bootlist -m normal -o > hdisk4 blv=hd5 > > When I reboot the machine (via "shutdown -Fr"), it boots off of > "bos_hd5" again... > > Any thoughts? > > -Chris as long as you are higher than TL3 (or I guess it was still called ML3 at that point), bootlist should show blv regardless of which image you boot from. did you use multibos to install an older image, or did you start with an older image perhaps? |