SEO

25A80998 NVRAM
RC script
evaluation error -
command line - execution error

Execution of a command line within the nvram
configuration variable “nvramrc” (script) resulted in a
“throw” being executed. This script can be modified by
the system firmware SMS utilities, the operating
system, PCI adapter rom code or utility, or an operator
(via the open firmware script editing command
“nvedit”). It may not be possible to resolve the
problem without a detailed analysis of the nvram script,
the current system configuration, and device tree
contents.
1. The problem can be caused by a SCSI
adapter,whose SCSI bus ID has been changed
from the default setting, no longer appearing in the
system. This can be caused either by removing a
SCSI adapter, or a problem with a SCSI adapter.
a. Select the “SCSI ID” utility from the SMS
menu(s).
1) Verify the list of SCSI controllers/adapters.
If the list is not correct, suspect a problem
with the adapter(s) installed but not listed.
2) Select the option to “Save” the
configuration information.
3) Restart the system.
b. If the problem persists, boot the operating
system and verify the SCSI bus IDs of any
installed/available SCSI controllers (change as
necessary), and restart the system.
2. Contact your service support representative for
further assistance.

DT wrote:
> Dear AIX Expert,
>
> Platform: 44P with AIX 4.3.3 ML10
>
> I got the error code "25a80998" on the top left hand side of the screen
> during reboot.
> Could anyone help me to find out what this error stand for?
>
> Thank you for your prompt reply.
>
> - DT
>
>
>