SEO

"DT" <odn@sinaman.com> wrote in message news:<bg2st7$e4h3@imsp212.netvigator.com>...
> Dear AIX Expert,
>
> Platform: 44P with AIX 4.3.3 ML10
>
> I got the error code "25a80998" on the top left hand side of the screen
> during reboot.
> Could anyone help me to find out what this error stand for?
>
> Thank you for your prompt reply.
>
> - DT

From the service guide:
25A80998 NVRAMRC script evaluation error -
command line execution error
Execution of a command line within the
NVRAM configuration variable
"NVRAMRC" (script) resulted in a
"throw" being executed. This script can
be modified by the system firmware
SMS utilities, the operating system, PCI
adapter ROM code or utility, or an
operator (through the open firmware
script editing command nvedit). It may
not be possible to resolve the problem
without a detailed analysis of the
NVRAM script, the current system
configuration, and device tree contents.
1. The problem can be caused by a
SCSI controller/adapter, whose
SCSI bus ID has been changed
from the default setting, no longer
appearing in the system. This can
be caused either by removing a
SCSI controller/adapter, or a
problem with a SCSI
controller/adapter.
v Select the SCSI ID utility from the
SMS menus.
a. Verify the list of SCSI
controllers/adapters. If the list
is not correct, suspect a
problem with the
controller/adapter that is
installed but not listed.
b. Select the option to save the
configuration information.
c. Restart the system.
v If the problem persists, boot the
operating system and verify the
SCSI bus IDs of any
installed/available SCSI
controllers/adapters (change as
necessary), and restart the
system.
2. Contact your service support
representative for further assistance.