Unix Technical Forum

Removing Power Supply

This is a discussion on Removing Power Supply within the AIX Operating System forums, part of the Unix Operating Systems category; --> 7025 F80 , AIX 4.3.3 3 Power Supplies. (one is optional) I have took off 1 power supply (the ...


Go Back   Unix Technical Forum > Unix Operating Systems > AIX Operating System

Register FAQ Members List Calendar Search Today's Posts Mark Forums Read
  #1 (permalink)  
Old 01-04-2008, 06:52 PM
Jarek Carnecki
 
Posts: n/a
Default Removing Power Supply

7025 F80 , AIX 4.3.3
3 Power Supplies. (one is optional)

I have took off 1 power supply (the optional one).
How can I tell my AIX, that 2 Power Supplies are ok ?

Everythig work fine but I have this message after diag :

>>
>>A PROBLEM WAS DETECTED ON Mon 21 Jul 10:17:53 2003
>>801014
>>
>>The Service Request Number(s)/Probable Cause(s)
>>(causes are listed in descending order of probability):
>>
>> 651-890: The CEC or SPCN reported an error. Record the following
>> reference and physical location codes, and refer to the
>>System Service Guide for this system unit.
>> Error log information:
>> Sequence number: 1040
>> Ref. Code: 10111534 FRU: 53P2830 V3
>>
>> 651-891: The CEC or SPCN reported an error. Record the following
>> reference and physical location codes, and refer to the
>>System Service Guide for this system unit.
>> Error log information:
>>
>> Sequence number: 1039
>> Ref. Code: 10113115 FRU: 24L1593 L1
>>



And

>> Broadcast message from root@omega (tty) at 12:00:00 ...
>>
>> rc.powerfail:2::WARNING!!! The system is now operating with a power
>> problem. This message will be walled every 12 hours. Remove this
>> crontab entry after the problem is resolved.



regards

Jarek Carnecki

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 01-04-2008, 06:52 PM
Yoyo
 
Posts: n/a
Default Re: Removing Power Supply

diag -a

should solve your problem....(follow instructions..)



Uzytkownik "Jarek Carnecki" <jarcar@gazeta.pl> napisal w wiadomosci
news:bfgo4q$dhs$1@news2.ipartners.pl...
> 7025 F80 , AIX 4.3.3
> 3 Power Supplies. (one is optional)
>
> I have took off 1 power supply (the optional one).
> How can I tell my AIX, that 2 Power Supplies are ok ?
>
> Everythig work fine but I have this message after diag :
>
> >>
> >>A PROBLEM WAS DETECTED ON Mon 21 Jul 10:17:53 2003
> >>801014
> >>
> >>The Service Request Number(s)/Probable Cause(s)
> >>(causes are listed in descending order of probability):
> >>
> >> 651-890: The CEC or SPCN reported an error. Record the following
> >> reference and physical location codes, and refer to the
> >>System Service Guide for this system unit.
> >> Error log information:
> >> Sequence number: 1040
> >> Ref. Code: 10111534 FRU: 53P2830 V3
> >>
> >> 651-891: The CEC or SPCN reported an error. Record the following
> >> reference and physical location codes, and refer to the
> >>System Service Guide for this system unit.
> >> Error log information:
> >>
> >> Sequence number: 1039
> >> Ref. Code: 10113115 FRU: 24L1593 L1
> >>

>
>
> And
>
> >> Broadcast message from root@omega (tty) at 12:00:00 ...
> >>
> >> rc.powerfail:2::WARNING!!! The system is now operating with a power
> >> problem. This message will be walled every 12 hours. Remove this
> >> crontab entry after the problem is resolved.

>
>
> regards
>
> Jarek Carnecki
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 01-04-2008, 06:52 PM
Yoyo
 
Posts: n/a
Default Re: Removing Power Supply

> >> rc.powerfail:2::WARNING!!! The system is now operating with a power
> >> problem. This message will be walled every 12 hours. Remove this
> >> crontab entry after the problem is resolved.


being sure that no power problem exist remove the entry which genetares
above warning from root crontab file...

crontab -e




Uzytkownik "Jarek Carnecki" <jarcar@gazeta.pl> napisal w wiadomosci
news:bfgo4q$dhs$1@news2.ipartners.pl...
> 7025 F80 , AIX 4.3.3
> 3 Power Supplies. (one is optional)
>
> I have took off 1 power supply (the optional one).
> How can I tell my AIX, that 2 Power Supplies are ok ?
>
> Everythig work fine but I have this message after diag :
>
> >>
> >>A PROBLEM WAS DETECTED ON Mon 21 Jul 10:17:53 2003
> >>801014
> >>
> >>The Service Request Number(s)/Probable Cause(s)
> >>(causes are listed in descending order of probability):
> >>
> >> 651-890: The CEC or SPCN reported an error. Record the following
> >> reference and physical location codes, and refer to the
> >>System Service Guide for this system unit.
> >> Error log information:
> >> Sequence number: 1040
> >> Ref. Code: 10111534 FRU: 53P2830 V3
> >>
> >> 651-891: The CEC or SPCN reported an error. Record the following
> >> reference and physical location codes, and refer to the
> >>System Service Guide for this system unit.
> >> Error log information:
> >>
> >> Sequence number: 1039
> >> Ref. Code: 10113115 FRU: 24L1593 L1
> >>

>
>
> And
>
> >> Broadcast message from root@omega (tty) at 12:00:00 ...
> >>
> >> rc.powerfail:2::WARNING!!! The system is now operating with a power
> >> problem. This message will be walled every 12 hours. Remove this
> >> crontab entry after the problem is resolved.

>
>
> regards
>
> Jarek Carnecki
>



Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


All times are GMT. The time now is 11:29 PM.


Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0
www.UnixAdminTalk.com