SEO

# errpt
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
91FBD5DB 0624083706 P S ssa0 SOFTWARE PROGRAM ERROR
2F3E09A4 0623130006 I H sys0 REPAIR ACTION
# errpt -a|more
---------------------------------------------------------------------------
LABEL: SSA_SOFTWARE_ERROR
IDENTIFIER: 91FBD5DB

Date/Time: Sat Jun 24 08:37:11 BEIS
Sequence Number: 226
Machine Id: 0008317F4C00
Node Id: mss_host
Class: S
Type: PERM
Resource Name: ssa0

Description
SOFTWARE PROGRAM ERROR

Probable Causes
SOFTWARE DEVICE DRIVER
ADAPTER MICROCODE

Install Causes
MISMATCH BETWEEN HARDWARE AND MICROCODE
MISMATCH BETWEEN SOFTWARE AND MICROCODE

Recommended Actions
CHECK FOR CORRECT MICROCODE FIX

Failure Causes
ADAPTER
DISK DRIVE

Recommended Actions
PERFORM PROBLEM DETERMINATION PROCEDURES

Detail Data
ERROR CODE
0504 2316 088F 2300 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000
---------------------------------------------------------------------------


what should i do ??

aixguard wrote:
> # errpt
....
>
> Probable Causes
> SOFTWARE DEVICE DRIVER
> ADAPTER MICROCODE
>
> Install Causes
> MISMATCH BETWEEN HARDWARE AND MICROCODE
> MISMATCH BETWEEN SOFTWARE AND MICROCODE
>
> Recommended Actions
> CHECK FOR CORRECT MICROCODE FIX
....
> what should i do ??
Fixing the problem ?

Get the latest SSA disk and SSA Adapter microcode for your AIX Version
and install them
Documentation will be found at:
http://www-1.ibm.com/support/docview...d=ssg1S4000278

hth
Hajo

Hajo Ehlers wrote:
> aixguard wrote:
> > # errpt
> ...
> >
> > Probable Causes
> > SOFTWARE DEVICE DRIVER
> > ADAPTER MICROCODE
> >
> > Install Causes
> > MISMATCH BETWEEN HARDWARE AND MICROCODE
> > MISMATCH BETWEEN SOFTWARE AND MICROCODE
> >
> > Recommended Actions
> > CHECK FOR CORRECT MICROCODE FIX
> ...
> > what should i do ??
> Fixing the problem ?
>
> Get the latest SSA disk and SSA Adapter microcode for your AIX Version
> and install them
> Documentation will be found at:
> http://www-1.ibm.com/support/docview...d=ssg1S4000278
>
> hth
> Hajo




you mean,update the ssa0's firmware first?

aixguard wrote:

> you mean,update the ssa0's firmware first?

I ment to read the link .
Just following the Installation Instructions.
In my understanding it say:
1) Check for the correct Software and Microcode for your system
2) Update the ssaX adapter and the driver software
3) Update the enclosure and ssa-disk .

hth
Hajo

Hajo Ehlers wrote:
> aixguard wrote:
>
> > you mean,update the ssa0's firmware first?
>
> I ment to read the link .
> Just following the Installation Instructions.
> In my understanding it say:
> 1) Check for the correct Software and Microcode for your system
> 2) Update the ssaX adapter and the driver software
> 3) Update the enclosure and ssa-disk .
>
> hth
> Hajo

My system is AIX5.2.I check it on the ibm website,the ssa adapter's
firmware should be C400 and i know how to update the firmware.
how can i update the firmware of the enclosure and ssa-disk ?

aixguard wrote:

>
> My system is AIX5.2.I check it on the ibm website,the ssa adapter's
> firmware should be C400 and i know how to update the firmware.
> how can i update the firmware of the enclosure and ssa-disk ?

By following the installation instructions ? SCNR

Extract:
.....
15. If you have 7133 D40 or T40 disk drive enclosures type the
following commands

cd /etc/microcode

ssa_sesdld -u -f coralXXX.hex (where XXX is the highest number that you
have in /etc/microcode)

16. To install latest level microcode to all SSA drives, run ssadload
-u from each system in turn.
NOTE: ALLOW SSADLOAD TO COMPLETE ON ONE SYSTEM BEFORE RUNNING IT ON
ANOTHER

hth
Hajo