hw.sensors.0=viaenv0, TSENS1, temp, 146.20 degC / 295.16 degF
hw.sensors.1=viaenv0, TSENS2, temp, 146.20 degC / 295.16 degF
hw.sensors.2=viaenv0, TSENS3, temp, 24.10 degC / 75.38 degF
hw.sensors.3=viaenv0, FAN1, fanrpm, 5113 RPM
hw.sensors.4=viaenv0, FAN2, fanrpm, 0 RPM
hw.sensors.5=viaenv0, VSENS1, volts_dc, 1.75 V
hw.sensors.6=viaenv0, VSENS2, volts_dc, 0.28 V
hw.sensors.7=viaenv0, Vcore, volts_dc, 3.34 V
hw.sensors.8=viaenv0, VSENS3, volts_dc, 4.95 V
hw.sensors.9=viaenv0, VSENS4, volts_dc, 12.31 V

I seriously doubt the CPU and system is running at 146.2 degC. 46
degC could be correct?
Any body know which files are associated with viaenv device?


dmesg follows while not generic the only change is to compile in
netatalk support.

OpenBSD 3.9 (XENA) #0: Mon Apr 24 23:26:08 EST 2006
root@xena.XYZ.com.au:/usr/src/sys/arch/i386/compile/XENA
cpu0: AMD Athlon(tm) processor ("AuthenticAMD" 686-class, 256KB L2
cache) 852 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC A,CMOV,PAT,PSE36,MMX,F
XSR
real mem = 200843264 (196136K)
avail mem = 176263168 (172132K)
using 2477 buffers containing 10145792 bytes (9908K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(2d) BIOS, date 07/24/01, BIOS32 rev. 0 @
0xfb420
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xded4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde40/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 9 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xcc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8363 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "VIA VT8363 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Fury" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x22
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x10: ATA66,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <ST340014A>
wd0: 16-sector PIO, LBA48, 38166MB, 78165360 sectors
wd1 at pciide0 channel 0 drive 1: <SAMSUNG SV1021H>
wd1: 16-sector PIO, LBA, 9732MB, 19932192 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-ROM CDU5211, YYS7> SCSI0 5/
cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x10: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x10: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x30
auvia0 at pci0 dev 7 function 5 "VIA VT82C686 AC97" rev 0x20: irq 9
ac97: codec id 0x41445360 (Analog Devices AD1885)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auvia0
re0 at pci0 dev 8 function 0 "Realtek 8169" rev 0x10: irq 11, address
00:40:f4:96:ff:09
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 0
fxp0 at pci0 dev 9 function 0 "Intel 8255x" rev 0x08, i82559: irq 10,
address 00:d0:b7:93:25:c2
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ath0 at pci0 dev 12 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, FCC2A*, address 00:0d:
88:57:6e:4e
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask f965 netmask fd65 ttymask fde7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 2
uhub2: ALCOR STRONG MAN KBD HUB, rev 1.10/1.01, addr 2
uhub2: 3 ports with 2 removable, bus powered
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: ALCOR STRONG MAN KBD HUB, rev 1.00/1.01, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302


Ian McWilliam