SEO

Hi all!

Well, using 3.6-release, with GENERIC, it boots and works just fine, of course on a single CPU (half of CPU?)... Tried to boot GENERIC.MP supplied - it hangs, dmesg below.
All of said below is when booting GENERIC.MP:
1. In BIOS - hyperthreading disabled> it founds both physical cpu's
2. hyperthreading enabled - same thing, only this time I can't be sure about it's two physical cpu's or it's one physical dual'ed.. :-)
3. it hangs right after it displays "pctr: user-level cycle counter enabled", with:
----snip-------
pctr: user-level cycle counter enabled
wd0(pciide1:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
wd0(pciide1:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0

<here the box is completely locked>

4. Can't provide dmesg with GENERIC.MP in any other mode than typing what's on the screen.


-----dmesg---------
OpenBSD 3.6 (GENERIC) #59: Fri Sep 17 12:32:57 MDT 2004
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE 2,SS,HTT,TM,SBF,CNXT-ID
real mem = 1073287168 (1048132K)
avail mem = 972746752 (949948K)
using 4278 buffers containing 53768192 bytes (52508K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(e4) BIOS, date 10/09/03, BIOS32 rev. 0 @ 0xfba90
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf54
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde60/224 (12 entries)
pcibios0: PCI Exclusive IRQs: 5 9 11 12 15
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82875P AGP" rev 0x02
pci1 at ppb0 bus 1
ppb1 at pci0 dev 3 function 0 "Intel 82875P PCI-CSA" rev 0x02
pci2 at ppb1 bus 2
em0 at pci2 dev 1 function 0 "Intel PRO/1000CT (82547EI)" rev 0x00: irq 15, address: 00:0e:a6:5f:77:5b
ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci3 at ppb2 bus 3
vga1 at pci3 dev 9 function 0 "S3 ViRGE DX/GX" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci3 dev 10 function 0 "Realtek 8139" rev 0x10: irq 11 address 00:c0:26:8c:5d:f2
rlphy0 at rl0 phy 0: RTL internal phy
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MITSUMI, CR-48XGTE, 1.0K> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 15 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SAMSUNG SP1614C>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <SAMSUNG SP1614C>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627THF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask f765 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302