SEO

Hi reyk,

my card shows up as:
ath0 at pci1 dev 5 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: AR5213 7.9 phy 4.5 rf2112a 5.6, WOR4W, address 00:11:f5:83:9e:f4
see full dmesg below, might not exactly what you are looking for, but here are
my experiences:

it sometimes sees the bssid from the AP, the ifconfig shows, but looses it
repeatedly. the status does not change to associated:
ath0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX ,MULTICAST> mtu 1500
lladdr 00:11:f5:83:9e:f4
media: IEEE802.11 autoselect (DS1 mode 11b)
status: no network
ieee80211: nwid IrieNet chan 4 bssid 00:11:09:9a:9a:7e 29%
inet6 fe80::211:f5ff:fe83:9ef4%ath0 prefixlen 64 scopeid 0x1

tcpdump shows receiving of broadcast packets from the access point, and
sending out probes by itself.

sebastian

OpenBSD 4.0-current (GENERIC) #1: Tue Oct 3 18:17:46 CEST 2006
sebastia@warbird.ds9:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.20GHz ("GenuineIntel" 686-class) 1.20
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC A,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM, SBF,EST,TM2


cpu0: Enhanced SpeedStep 1200 MHz (908 mV): speeds: 1200, 1100, 1000, 900,
800, 600 MHz
real mem = 518942720 (506780K)
avail mem = 465391616 (454484K)
using 4256 buffers containing 26050560 bytes (25440K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 04/13/05, BIOS32 rev. 0 @ 0xfc3ae,
SMBIOS rev. 2.3 @ 0xec000 (37 entries)
bios0: TOSHIBA libretto U100
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0230/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xe0000/0x10000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at
0xd8000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus 1
ath0 at pci1 dev 5 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: AR5213 7.9 phy 4.5 rf2112a 5.6, WOR4W, address 00:11:f5:83:9e:f4
fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x83, i82562: irq 11,
address 00:0e:7b:fc:c0:a0
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cbb0 at pci1 dev 11 function 0 "TI PCI7XX1 CardBus" rev 0x00: irq 11
"TI PCI7XX1 FireWire" rev 0x00 at pci1 dev 11 function 2 not configured
sdhc0 at pci1 dev 11 function 4 "TI PCI7XX1 Secure Data" rev 0x00: irq 11
sdmmc0 at sdhc0
sdmmc1 at sdhc0
sdmmc2 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK6006GAH>
wd0: 16-sector PIO, LBA48, 56972MB, 116680095 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 11, ICH4
AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ugen0 at uhub0 port 2
ugen0: AuthenTec Fingerprint Sensor, rev 1.10/6.21, addr 2
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted