Unix Technical Forum

bsd.mp on Dell Latitude C600

This is a discussion on bsd.mp on Dell Latitude C600 within the mailing.openbsd.tech forums, part of the OpenBSD category; --> Seems to be working. OpenBSD 3.5-current (GENERIC.MP) #24: Tue Jun 22 22:12:09 MDT 2004 deraadt@i386.openbsd.org:/usr/src/sy...ile/GENERIC.MP cpu0: Intel Pentium III ...


Go Back   Unix Technical Forum > Unix Operating Systems > OpenBSD > mailing.openbsd.tech

FAQ Members List Calendar Search Today's Posts Mark Forums Read
  #1 (permalink)  
Old 02-18-2008, 07:06 AM
Derick Siddoway
 
Posts: n/a
Default bsd.mp on Dell Latitude C600

Seems to be working.


OpenBSD 3.5-current (GENERIC.MP) #24: Tue Jun 22 22:12:09 MDT 2004
deraadt@i386.openbsd.org:/usr/src/sy...ile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 702 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC A,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 402083840 (392660K)
avail mem = 363896832 (355368K)
using 4278 buffers containing 20205568 bytes (19732K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/07/02, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, estimated 9:45 hours
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfbd80/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371 ISA and IDE" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000
mainbus0: scanning 0x9fc00 to 0x9fff0 for MP signature
mainbus0: scanning 0x9f800 to 0x9fbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 702 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC A,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu0: kstack at 0xe74d4000 for 8192 bytes
cpu0: idle pcb at 0xe74d4000, idle sp at 0xe74d5fa0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility M3" rev 0x02
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 3 function 0 "Texas Instruments PCI1420 CardBus" rev 0x00: irq 11
cbb1 at pci0 dev 3 function 1 "Texas Instruments PCI1420 CardBus" rev 0x00: irq 11
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DJSA-220>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x03 at pci0 dev 7 function 3 not configured
esa0 at pci0 dev 8 function 0 "ESS Maestro 3" rev 0x10: irq 5
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at esa0
xl0 at pci0 dev 16 function 0 "3Com 3c556 100Base-TX" rev 0x10: irq 11, address 00:01:03:88:85:d2
tqphy0 at xl0 phy 0: 78Q2120 10/100 media interface, rev. 11
"3Com Mini-PCI V.90 Modem" rev 0x10 at pci0 dev 16 function 1 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask efcd netmask efcd ttymask ffcf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wi0 at pcmcia1 function 0 "Lucent Technologies, WaveLAN/IEEE, Version 01.01" port 0xa000/64
wi0: Firmware 7.28 variant 1, address 00:02:2d:67:40:7a

--
Oh, but for most fun and enjoyment, you have to get NetBEUI going.
NetBIOS over TCP/IP is just plain _cheating_.
(Graham Reed)

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


All times are GMT. The time now is 09:02 AM.


Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0
www.UnixAdminTalk.com