SEO

Tried the current bsd and bsd.mp on a Thinkpad T41. Only observed problem is
IOMEGA usb memory stick not recognized (no error messages that I could see) and
usb floppy only recognized and configured if plugged in at boot. floppy
detached ok but not recongnized when plugged back in.

OpenBSD 3.5-current (GENERIC) #177: Fri Jun 25 13:03:10 MDT 2004
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1400MHz ("GenuineIntel" 686-class) 1.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CM OV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM 2
cpu0: Enhanced SpeedStep 1400 MHz (1484 mV): speeds: 1400, 1200, 1000, 800, 600 MHz
real mem = 535797760 (523240K)
avail mem = 488398848 (476952K)
using 4278 buffers containing 26894336 bytes (26264K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(a1) BIOS, date 04/22/04, BIOS32 rev. 0 @ 0xfd750
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high
pcibios0 at bios0: rev. 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7 LW" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01evcount_attach uhci0
evcount_attach intr
: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01evcount_attach uhci1
: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01evcount_attach uhci2
: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01evcount_attach ehci0
: irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
cbb0 at pci2 dev 0 function 0 "Texas Instruments PCI4520 CardBus" rev 0x01evcount_attach cbb0
: irq 11
cbb1 at pci2 dev 0 function 1 "Texas Instruments PCI4520 CardBus" rev 0x01evcount_attach cbb1
: irq 11
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT Mobile (82540EP)" rev 0x03evcount_attach em0
: irq 11, address: 00:0d:60:8b:63:40
unknown vendor 0x168c product 0x1014 (class network subclass ethernet, rev 0x01) at pci2 dev 2 function 0 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
evcount_attach pciide0
wd0 at pciide0 channel 0 drive 0: <HTS726060M9AT00>
wd0: 16-sector PIO, LBA, 53805MB, 110194034 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
evcount_attach pciide0
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA755zDVD/CDRW, 1.20> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801DB SMBus" rev 0x01 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97 Audio" rev 0x01evcount_attach auich0
: irq 11, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
auich0: measured ac97 link rate at 48026 Hz, will use 48000 Hz
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
evcount_attach pckbc0
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
evcount_attach pckbc0
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
evcount_attach fdc0
biomask effd netmask effd ttymask ffff
evcount_attach clock
evcount_attach rtc
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ehci0: handing over full speed device on port 3 to uhci1
uhub3: port 3, device disappeared after reset
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: MITSUMI MITSUMI USB FDD, rev 1.10/1.00, addr 2
umass0: using UFI over CBI
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <, , > SCSI0 0/direct fixed
sd0: 103327MB, 103327 cyl, 64 head, 32 sec, 512 bytes/sec, 211613905 sec total

OpenBSD 3.5-current (GENERIC.MP) #29: Fri Jun 25 13:22:47 MDT 2004
deraadt@i386.openbsd.org:/usr/src/sy...ile/GENERIC.MP
cpu0: Intel(R) Pentium(R) M processor 1400MHz ("GenuineIntel" 686-class) 1.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CM OV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM 2
cpu0: Enhanced SpeedStep 1400 MHz (1484 mV): speeds: 1400, 1200, 1000, 800, 600 MHz
real mem = 535797760 (523240K)
avail mem = 488341504 (476896K)
using 4278 buffers containing 26894336 bytes (26264K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(71) BIOS, date 04/22/04, BIOS32 rev. 0 @ 0xfd750
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high
pcibios0 at bios0: rev. 2.1 @ 0xfd6e0/0x920
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdea0/272 (15 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xdc000/0x4000! 0xe0000/0x10000
mainbus0: scanning 0x9f000 to 0x9f3f0 for MP signature
mainbus0: scanning 0x9ec00 to 0x9eff0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M ("GenuineIntel" 686-class) 1.40 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CM OV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF
(null): Enhanced SpeedStep 1400 MHz (1484 mV): speeds: 1400, 1200, 1000, 800, 600 MHz
cpu0: kstack at 0xe774a000 for 8192 bytes
cpu0: idle pcb at 0xe774a000, idle sp at 0xe774bfa0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7 LW" rev 0x00
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01evcount_attach uhci0
evcount_attach intr
: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01evcount_attach uhci1
: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01evcount_attach uhci2
: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01evcount_attach ehci0
: irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
cbb0 at pci2 dev 0 function 0 "Texas Instruments PCI4520 CardBus" rev 0x01evcount_attach cbb0
: irq 11
cbb1 at pci2 dev 0 function 1 "Texas Instruments PCI4520 CardBus" rev 0x01evcount_attach cbb1
: irq 11
em0 at pci2 dev 1 function 0 "Intel PRO/1000MT Mobile (82540EP)" rev 0x03evcount_attach em0
: irq 11, address: 00:0d:60:8b:63:40
unknown vendor 0x168c product 0x1014 (class network subclass ethernet, rev 0x01) at pci2 dev 2 function 0 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
evcount_attach pciide0
wd0 at pciide0 channel 0 drive 0: <HTS726060M9AT00>
wd0: 16-sector PIO, LBA, 53805MB, 110194034 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
evcount_attach pciide0
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA755zDVD/CDRW, 1.20> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801DB SMBus" rev 0x01 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97 Audio" rev 0x01evcount_attach auich0
: irq 11, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
auich0: measured ac97 link rate at 48023 Hz, will use 48000 Hz
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
evcount_attach pckbc0
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
evcount_attach pckbc0
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
evcount_attach fdc0
biomask effd netmask effd ttymask ffff
evcount_attach clock
evcount_attach rtc
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ehci0: handing over full speed device on port 3 to uhci1
uhub3: port 3, device disappeared after reset
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: MITSUMI MITSUMI USB FDD, rev 1.10/1.00, addr 2
umass0: using UFI over CBI
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <, , > SCSI0 0/direct fixed
sd0: 100097MB, 100097 cyl, 64 head, 32 sec, 512 bytes/sec, 204999122 sec total