SEO

This is the bsd.rd booted and working:

OpenBSD 4.2-current (RAMDISK_CD) #610: Tue Jan 15 12:19:43 MST 2008
pvalchev@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: VIA Esther processor 1500MHz ("CentaurHauls" 686-class) 1.50 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,CMOV,PAT,CFLUSH,ACPI,MMX
,FXSR,SSE,SSE2,TM,
SBF,SSE3,EST,TM2
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
real mem = 933724160 (890MB)
avail mem = 896548864 (855MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/23/07, BIOS32 rev. 0 @ 0xff080,
SMBIOS rev. 2.3 @ 0xf0000 (1
4 entries)
bios0: vendor OQO Inc. version "1.0.7" date 05/23/2007
bios0: OQO Inc. OQO Model 02
acpi0 at bios0: rev 2, can't enable ACPI
bios0: ROM list: 0xc0000/0xd600
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA CX700 Host" rev 0x03
agp at pchb0 not configured
pchb1 at pci0 dev 0 function 1 "VIA CX700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CX700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA CX700 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CX700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CX700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA S3 UniChrome Pro II IGP" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pciide0 at pci0 dev 15 function 0 "VIA VX700 IDE" rev 0x00: ATA133, unused
(couldn't map registers),
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
wd0 at pciide0 channel 1 drive 0: <HTC426060G8CE00>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:1:0): using PIO mode 4
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x90: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x90: irq 10
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x90: irq 9
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 17 function 0 "VIA CX700 ISA" rev 0x00
pchb6 at pci0 dev 17 function 7 "VIA VX700 Host" rev 0x00
ppb1 at pci0 dev 19 function 0 "VIA CX700 Host" rev 0x00
pci2 at ppb1 bus 2
"VIA HD Audio" rev 0x10 at pci2 dev 1 function 0 not configured
ppb2 at pci0 dev 19 function 1 "VIA CX700 PCI-PCI" rev 0x00
pci3 at ppb2 bus 3
ath0 at pci3 dev 4 function 0 "Atheros AR5413" rev 0x01: irq 10
ath0: AR5413 10.5 phy 6.1 rf 6.3, FCC2A*, address 00:0c:96:40:78:b0
rl0 at pci3 dev 5 function 0 "Realtek 8139" rev 0x10: irq 9, address
00:0c:96:40:52:0b
rlphy0 at rl0 phy 0: RTL internal PHY
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask fff5 netmask fff5 ttymask fff7
rd0: fixed, 3800 blocks
uhub2: device problem, disabling port 1
root on rd0a swap on rd0b dump on rd0b

--
MC%ns Nilsson Systems Specialist
+46 70 681 7204 cell KTHNOC
+46 8 790 6518 office MN1334-RIPE

Sign my PETITION.

[demime 1.01d removed an attachment of type application/pgp-signature]