Unix Technical Forum

Re: Need some kernels tested

This is a discussion on Re: Need some kernels tested within the mailing.openbsd.tech forums, part of the OpenBSD category; --> Theo de Raadt wrote: > In the next hours or so, a new directory will show up that has ...


Go Back   Unix Technical Forum > Unix Operating Systems > OpenBSD > mailing.openbsd.tech

FAQ Members List Calendar Search Today's Posts Mark Forums Read
  #1 (permalink)  
Old 02-18-2008, 07:00 AM
Darren Tucker
 
Posts: n/a
Default Re: Need some kernels tested

Theo de Raadt wrote:
> In the next hours or so, a new directory will show up that has some
> kernels that we need tested.


The bsd.mp.i386 kernel locks up my test box (AMD K6-3 w/ALI chipset)
during boot. The bsd.i386 kernel works OK (completed "make build", I
will also send a report in the requested format to beck@).

[ using 429320 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2004 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 3.5-current (GENERIC.MP) #16: Tue Jun 8 19:23:19 MDT 2004

deraadt@cvs.openbsd.org:/home/staff/...ile/GENERIC.MP
cpu0: AMD-K6(tm)-III Processor ("AuthenticAMD" 586-class) 501 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem = 267952128 (261672K)
avail mem = 239755264 (234136K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 10/25/00, BIOS32 rev. 0 @ 0xfdb20
apm at bios0 function 0x15 not configured
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf7a10/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Acer Labs M1533 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000 0xca000/0x1000
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD K6-2+/III+ ("AuthenticAMD" 586-class) 501 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Acer Labs M1541 PCI" rev 0x04
ppb0 at pci0 dev 1 function 0 "Acer Labs M5243 AGP/PCI-PCI" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "3DFX Interactive Banshee" rev 0x03
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ohci0 at pci0 dev 2 function 0 "Acer Labs M5237 USB" rev 0x03: irq 10,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0xc3
fxp0 at pci0 dev 8 function 0 "Intel 82557" rev 0x08: irq 11, address
00:d0:b7:d4:32:2d
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
fxp1 at pci0 dev 9 function 0 "Intel 82557" rev 0x08: irq 9, address
00:d0:b7:d5:5e:62
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
fxp2 at pci0 dev 10 function 0 "Intel 82557" rev 0x08: irq 11, address
00:02:b3:24:88:11
inphy2 at fxp2 phy 1: i82555 10/100 media interface, rev. 4
pciide0 at pci0 dev 15 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc2:
DMA, channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPD3084AT>
wd0: 16-sector PIO, LBA, 8063MB, 16514064 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CDU4811, PY09> SCSI0 5/cdrom removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lpt1 at isa0 port 0x278/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e565 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)

[at this point it's wedged, a break does nothing]

--
Darren Tucker (dtucker at zip.com.au)
GPG key 8FF4FA69 / D9A3 86E9 7EEE AF4B B2D4 37C9 C982 80C7 8FF4 FA69
Good judgement comes with experience. Unfortunately, the experience
usually comes from bad judgement.

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


All times are GMT. The time now is 05:52 PM.


Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0
www.UnixAdminTalk.com