SEO

This uniprocessor machine boots bsd.i386 with latest userland snapshot
just fine, but I'm currently unable to stress test it.

The bsd.mp.i386 stops booting after the 'mtrr: Pentium Pro MTRR support'
line.

Both dmesg's follow.

(bsd.i386, June 8)

OpenBSD 3.5-current (GENERIC) #31: Tue Jun 8 19:19:38 MDT 2004
deraadt@i386.openbsd.org:/home/staff/deraadt/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Celeron ("GenuineIntel" 686-class, 128KB L2 cache) 434 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC A,CMOV,PAT,PSE36,MMX,FXSR
real mem = 66625536 (65064K)
avail mem = 53383168 (52132K)
using 838 buffers containing 3432448 bytes (3352K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(cc) BIOS, date 02/01/01, BIOS32 rev. 0 @
0xfb260
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb6d8
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdd10/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C691 PCI" rev 0x44
ppb0 at pci0 dev 1 function 0 "VIA VT82C598 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xa1
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C596A ISA" rev 0x12
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA66,
channel 0 c
onfigured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <WPI, CDS-32X ERf, A2.0> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x08: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 7 function 3 "VIA VT82C596 Power Mgmt" rev 0x20
rl0 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: irq 10 address
00:50:bf:5b:18:a8
rlphy0 at rl0 phy 0: RTL internal phy
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 1: density unknown
biomask ff65 netmask ff65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0d
rootdev=0x3 rrootdev=0x303 rawdev=0x302


--------------------------------------------------------------------


(bsd.mp.i386, June 8)

OpenBSD 3.5-current (GENERIC.MP) #16: Tue Jun 8 19:23:19 MDT 2004
deraadt@cvs.openbsd.org:/home/staff/...ile/GENERIC.MP
cpu0: Intel Celeron ("GenuineIntel" 686-class, 128KB L2 cache) 434 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC A,CMOV,PAT,PSE36,MMX,FXSR
real mem = 66625536 (65064K)
avail mem = 53321728 (52072K)
using 838 buffers containing 3432448 bytes (3352K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(cc) BIOS, date 02/01/01, BIOS32 rev. 0 @
0xfb260
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb6d8
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdd10/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 10 11
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa000
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Celeron ("GenuineIntel" 686-class, 128KB L2 cache) 434 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MC A,CMOV,PAT,PSE36,MMX,FXSR
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C691 PCI" rev 0x44
ppb0 at pci0 dev 1 function 0 "VIA VT82C598 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xa1
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C596A ISA" rev 0x12
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA66,
channel 0 c
onfigured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <WPI, CDS-32X ERf, A2.0> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x08: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 7 function 3 "VIA VT82C596 Power Mgmt" rev 0x20
rl0 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: irq 10 address
00:50:bf:5b:18:a8
rlphy0 at rl0 phy 0: RTL internal phy
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 1: density unknown
biomask ff65 netmask ff65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support

(halts here)