vBulletin Search Engine Optimization
| |||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| ||||
| On Wed, Jun 09, 2004 at 12:48:45PM +0200, Markus Friedl wrote: > > 1) In the first place we are interested how bsd.i386 > works on both single and multi processor machines. bsd.i386 works fine: OpenBSD 3.5-current (GENERIC) #33: Wed Jun 9 12:40:16 MDT 2004 deraadt@i386.openbsd.org:/home/staff/deraadt/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 1500MHz ("GenuineIntel" 686-class) 1.50 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE 2,SS,HTT,TM real mem = 535961600 (523400K) avail mem = 488554496 (477104K) using 4278 buffers containing 26902528 bytes (26272K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 06/06/01, BIOS32 rev. 0 @ 0xffe90 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfbbb0/176 (9 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801BA LPC" rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0xa800 0xca800/0x5800 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82850 Host" rev 0x02 ppb0 at pci0 dev 1 function 0 "Intel 82850/82860 AGP" rev 0x02 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 GTS" rev 0xa4 wsdisplay0 at vga1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x04 pci2 at ppb1 bus 2 ahc1 at pci2 dev 10 function 0 "Adaptec AHA-2940U2 U2" rev 0x00: irq 11 scsibus0 at ahc1: 16 targets sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST39102LW, 0005> SCSI2 0/direct fixed sd0: 8683MB, 6962 cyl, 12 head, 212 sec, 512 bytes/sec, 17783240 sec total sd1 at scsibus0 targ 2 lun 0: <SEAGATE, ST336705LW, 5063> SCSI3 0/direct fixed sd1: 35003MB, 19036 cyl, 8 head, 470 sec, 512 bytes/sec, 71687370 sec total xl0 at pci2 dev 12 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 11, address 00:06:5b:1b:22:6a exphy0 at xl0 phy 24: 3Com internal media interface ichpcib0 at pci0 dev 31 function 0 "Intel 82801BA LPC" rev 0x04 pciide0 at pci0 dev 31 function 1 "Intel 82801BA IDE" rev 0x04: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <IC35L040AVER07-0> wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <Lite-On, LTN486 48x Max, YD01> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x04: irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered "Intel 82801BA SMBus" rev 0x04 at pci0 dev 31 function 3 not configured uhci1 at pci0 dev 31 function 4 "Intel 82801BA USB2" rev 0x04: irq 9 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered auich0 at pci0 dev 31 function 5 "Intel 82801BA AC97 Audio" rev 0x04: irq 10, ICH2 AC97 ac97: codec id 0x41445360 (Analog Devices AD1885) ac97: codec features headphone, Analog Devices Phat Stereo audio0 at auich0 auich0: measured ac97 link rate at 695652 Hz isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> sysbeep0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask eb65 netmask eb65 ttymask fbe7 pctr: user-level cycle counter enabled ahc1: target 0 using 16bit transfers ahc1: target 0 synchronous at 20.0MHz, offset = 0xf dkcsum: sd0 matched BIOS disk 80 ahc1: target 2 using 16bit transfers ahc1: target 2 synchronous at 20.0MHz, offset = 0x3f dkcsum: sd1 matched BIOS disk 82 wd0: no disk label dkcsum: wd0 matched BIOS disk 81 root on sd0a rootdev=0x400 rrootdev=0xd00 rawdev=0xd02 arpresolve: can't allocate llinfo [last message repeats] > 2) But, of course we are also interested on how bsd.mp.i386 > works on multi or single processor machines. bsd.mp.i386 does not work: [ using 429320 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2004 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 3.5-current (GENERIC.MP) #18: Wed Jun 9 12:40:26 MDT 2004 deraadt@cvs.openbsd.org:/home/staff/...ile/GENERIC.MP cpu0: Intel(R) Pentium(R) 4 CPU 1500MHz ("GenuineIntel" 686-class) 1.50 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,P GE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE 2,SS,HTT,TM real mem = 535961600 (523400K) avail mem = 488484864 (477036K) using 4278 buffers containing 26902528 bytes (26272K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 06/06/01, BIOS32 rev. 0 @ 0xffe90 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfbbb0/176 (9 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801BA LPC" rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0xa800 0xca800/0x5800 mainbus0: Intel MP Specification (Version 1.4) (DELL WS 330 ) panic: TLB IPI rendezvous failed (mask 1) Stopped at Debugger+0x4: leave RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC! DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! CPU 240 entering ddb ddb{240}> trace Debugger(0,d06788c0,5f5e102,d03142b2,0) at Debugger+0x4 panic(d04d1f60,1,0,e,e774d000) at panic+0x87 pmap_tlb_shootnow(1,e774c000,fe121,d06e5e04,e774d0 2c) at pmap_tlb_shootnow+0xc2 pmap_kremove(e774c000,1000,1,d05c480c,d06e5ea8,d10 4dfc0,d059c498,d0331738,d06e5 ea8,d104dfc0,0,0,e774d02c,e774c000,1000,0,0,1000,d 06e5ec8,d0331624,d104dfc0,73, d04ace68,d05cc9a0,d058d3ac,d104dfc0,d059c498,0,4,0 ,d06e5ec8,d01f3e7d,d04ace5f,5 ,d06e5ec8,d01f3ee2,0,d04cd5c0,d04de679,d01f3e90,0, 1,d059c498,0,d1040fc0,d059c49 8,d06e5f08,d01ef612,0,d104dfc0,0,8,0,d04cd5c0,d05c c3e8,d030ad49,0,0,d058afd0,0, d104dfd4,d059c480,d06e5f38) at pmap_kremove+0x78 mpbios_scan(d104dfc0,73,d04ace68,d05cc9a0,d058d3ac ) at mpbios_scan+0x367 mainbus_attach(0,d104dfc0,0,8,0,d04cd5c0,d05cc3e8, d030ad49,0,0,d058afd0,0,d104d fd4,d059c480,d06e5f38,d01ef4c2,0,d058afd0,0,0,9,d0 5cc260,60,d03feffc,9,d05cc260 ,d06e5f58,d0307a4f,d04cd5c0,0,d06e5f58,d0307a40,9, d05cc260,d06e5fa8,d01dc84d,0, 1,3,0,d06e3010,6e3000,6ea000,0,0,0,0,10,d06e5fa0,d 06e5f98,2,862007ff,d05e,0,0,d 01004bf,0,0,0,0,0) at mainbus_attach+0x58 config_attach(0,d058afd0,0,0,9) at config_attach+0x146 config_rootfound(d04cd5c0,0,d06e5f58,d0307a40) at config_rootfound+0x3e cpu_configure(0,1,3,0,d06e3010,6e3000,6ea000,0,0,0 ,0,10,d06e5fa0,d06e5f98,2,862 007ff,d05e,0,0,d01004bf,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ,0,0,0,0,0,0,0,0,0,0,0,0,0) at cpu_configure+0x1f main(0,0,0,0,0) at main+0x32d ddb{240}> ps PID PPID PGRP UID S FLAGS WAIT COMMAND * 0 -1 0 0 7 0x80204 swapper ddb{240}> *----------------------------------------------------------------------* Note: this workstation did not get the second cpu installed. |
| Thread Tools | |
| Display Modes | |
|
|