SEO

Sorry for my late answer. As the 3.6 "What's New" tells
about "A generic IEEE 802.11 framework has been added" I
installed 3.6. But the problem remains.

On Sat, Oct 30, 2004 at 08:39:20PM +0300, Can Erkin Acar wrote:
> In terms of pppoe, both client requests look equally valild.
> I do not have a wireless setup around to test so I
> have a couple of questions to help debug the problem.
>
> 1. What server are you using? Can you give more
> information about your setup?

I don't know what is the server used by the ISP. The
configuration here quite follows those of the man pages. I
have attached files with all I think in this regard.

> 2. What is the other client (OS/card etc).
> Where are you receiving this clients traffic (openbsd?)

The traffic tcpdumps I attached in the previous message was
from this same box, OpenBSD-3.5.

> 3. can you check whether the requests are actually sent out?
> by either listening on a different machine, or on the server
> 4. Is the server sending out replies that are somehow
> not received by OpenBSD

I am trying the ISP people but no success yet. Another box
I have access is connected to another AP and so I have no
connection with this.


Thank you very much.

--Jairo Souto <jsouto at citel1.com.br> (38)3531-1314 (31)9728-0014
dmesg
----------------------------------------
OpenBSD 3.6 (GENERIC) #59: Fri Sep 17 12:32:57 MDT 2004
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium (P54C) ("GenuineIntel" 586-class) 134 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8
cpu0: F00F bug workaround installed
real mem = 24748032 (24168K)
avail mem = 14462976 (14124K)
using 327 buffers containing 1339392 bytes (1308K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(fe) BIOS, date 03/31/97, BIOS32 rev. 0 @ 0xfb440
apm0 at bios0: Power Management spec V1.2
apm0: APM engage (device 1): power management disabled (1)
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb904
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:01:0 ("SIS 85C503 System" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SIS 5571 PCI" rev 0x01
pcib0 at pci0 dev 1 function 0 "SIS 85C503 System" rev 0x01
pciide0 at pci0 dev 1 function 1 "SIS 5513 EIDE" rev 0xc1: 5597/5598: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST32531A>
wd0: 16-sector PIO, LBA, 2439MB, 4996476 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
rl0 at pci0 dev 14 function 0 "Realtek 8139" rev 0x10: irq 11 address 00:e0:7d:ac:ca:45
rlphy0 at rl0 phy 0: RTL internal phy
vga1 at pci0 dev 16 function 0 "Trident TGUI 9660" rev 0xd3
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16450, no fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16450, no fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Vadem VG469> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
wi0 at pcmcia0 function 0 "Lucent Technologies, WaveLAN/IEEE, Version 01.01" port 0x400/64: irq 9
wi0: Firmware 8.72 variant 1, address 00:02:2d:8f:d3:f1
pcmcia1 at pcic0 controller 0 socket 1
pcic0: irq 5, polling enabled
biomask f545 netmask ff45 ttymask ffe7
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
wsdisplay0: screen 8 added (80x25, vt100 emulation)
wsdisplay0: screen 9 added (80x25, vt100 emulation)
wsdisplay0: screen 10 added (80x25, vt100 emulation)
wsdisplay0: screen 11 added (80x25, vt100 emulation)
rc.conf
----------------------------------------
#!/bin/sh -
#
# $OpenBSD: rc.conf,v 1.99 2004/07/15 11:29:12 henning Exp $

# set these to "NO" to turn them off. otherwise, they're used as flags
routed_flags=NO # for normal use: "-q"
mrouted_flags=NO # for normal use: "", if activated
# be sure to enable multicast_router below.
bgpd_flags=NO # for normal use: ""
rarpd_flags=NO # for normal use: "-a"
bootparamd_flags=NO # for normal use: ""
rbootd_flags=NO # for normal use: ""
sshd_flags="" # for normal use: ""
named_flags="" # for normal use: ""
rdate_flags=NO # for normal use: [RFC868-host] or [-n RFC2030-host]
timed_flags=NO # for normal use: ""
ntpd_flags=NO # for normal use: ""
isakmpd_flags=NO # for normal use: ""
mopd_flags=NO # for normal use: "-a"
apmd_flags=NO # for normal use: ""
dhcpd_flags="" # for normal use: ""
rtadvd_flags=NO # for normal use: list of interfaces
# be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO # for normal use: ""
# be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO # for normal use: interface
# be sure to set net.inet6.ip6.forwarding=0
# be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO # for normal use: "" (or "-l" for debugging)
sensorsd_flags=NO # for normal use: ""
hotplugd_flags=NO # for normal use: ""

# use -u to disable chroot, see httpd(8)
httpd_flags=NO # for normal use: "" (or "-DSSL" after reading ssl(8))

# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
#sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"
sendmail_flags=NO
spamd_flags=NO # for normal use: "" and see spamd-setup(8)
spamd_grey=NO # use spamd greylisting if YES

# Set to NO if ftpd is running out of inetd
ftpd_flags=NO # for non-inetd use: "-D"

# Set to NO if identd is running out of inetd
identd_flags=NO # for non-inetd use: "-b -elo"

# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO # for normal use: ""

# For enabling console mouse support (i386 and alpha only)
wsmoused_flags="-p /dev/cua00" # for ps/2 or usb mice: "", serial: "-p /dev/cua00"

# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO # see sysctl.conf for nfs client configuration
lockd=NO
amd=NO
pf=NO # Packet filter / NAT
portmap=NO # Note: inetd(8) rpc services need portmap too
inetd=YES # almost always needed
check_quotas=YES # NO may be desirable in some YP environments

krb5_master_kdc=NO # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO # KerberosV slave KDC.
afs=NO # mount and run afs

# Multicast routing configuration
# Please look at netstart(8) for a detailed description if you change these
multicast_host=NO # Route all multicast packets to a single interface
multicast_router=NO # A multicast routing daemon will be run, e.g. mrouted

# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags= # "-z" to compress
ypserv_flags= # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags=NO # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4" # Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt # AMD's mount directory
amd_master=/etc/amd/master # AMD 'master' map
syslogd_flags= # add more flags, ie. "-u -a /chroot/dev/log"
pf_rules=/etc/pf.conf # Packet filter rules file
pflogd_flags= # add more flags, ie. "-s 256"
afsd_flags= # Flags passed to afsd
shlib_dirs= # extra directories for ldconfig, separated
# by space

local_rcconf="/etc/rc.conf.local"

[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line
sysctl.conf
----------------------------------------
net.inet.ip.forwarding=1 # 1=Permit forwarding (routing) of packets
net.inet6.ip6.forwarding=1 # 1=Permit forwarding (routing) of packets
#net.inet6.ip6.accept_rtadv=1 # 1=Permit IPv6 autoconf (forwarding must be 0)
#net.inet.tcp.rfc1323=0 # 0=disable TCP RFC1323 extensions (for if tcp is slow)
#net.inet.tcp.rfc3390=1 # 1=Enable RFC3390 for TCP window increasing
#net.inet.esp.enable=0 # 0=Disable the ESP IPsec protocol
#net.inet.ah.enable=0 # 0=Disable the AH IPsec protocol
#net.inet.udpencap.enable=0 # 0=Disable ESP-in-UDP encapsulation
#net.inet.ipcomp.enable=1 # 1=Enable the IPCOMP protocol
#net.inet.tcp.ecn=1 # 1=Enable the TCP ECN extension
#ddb.panic=0 # 0=Do not drop into ddb on a kernel panic
#ddb.console=1 # 1=Permit entry of ddb from the console
#fs.posix.setuid=0 # 0=Traditional BSD chown() semantics
vm.swapencrypt.enable=1 # 1=Encrypt pages that go to swap
#vfs.nfs.iothreads=4 # number of nfsio kernel threads
#net.inet.ip.mtudisc=0 # 0=disable tcp mtu discovery
#kern.usercrypto=1 # 1=enable userland use of /dev/crypto
#kern.splassert=2 # 2=enable and verbose error messages.
#machdep.allowaperture=2 # See xf86(4)
#machdep.apmwarn=10 # battery % when apm status messages enabled
#machdep.apmhalt=1 # 1=powerdown hack, try if halt -p doesn't work
machdep.kbdreset=1 # permit console CTRL-ALT-DEL to do a nice halt
#machdep.userldt=1 # allow userland programs to play with ldt,
# required by some ports
#kern.emul.aout=1 # enable running dynamic OpenBSD a.out bins
#kern.emul.bsdos=1 # enable running BSD/OS binaries
#kern.emul.freebsd=1 # enable running FreeBSD binaries
#kern.emul.ibcs2=1 # enable running iBCS2 binaries
#kern.emul.linux=1 # enable running Linux binaries
#kern.emul.svr4=1 # enable running SVR4 binaries
hostname.wi0
----------------------------------------
!/sbin/wicontrol \$if -e 1 -k 0x********** -n band -p bss -f 10
up
ifconfig wi0
----------------------------------------
wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:02:2d:8f:d3:f1
nwid: band
nwkey: <not displayed>
powersave: off
media: IEEE802.11 autoselect (DS11)
status: active
inet6 fe80::202:2dff:fe8f:d3f1%wi0 prefixlen 64 scopeid 0x2
wicontrol wi0
----------------------------------------
NIC serial number: [ 03UT13367758 ]
Station name: [ WaveLAN/IEEE node ]
SSID for IBSS creation: [ IBSS ]
Current netname (SSID): [ band ]
Desired netname (SSID): [ band ]
Current BSSID: [ 00:02:78:e3:d0:39 ]
Channel list: [ 2047 ]
IBSS channel: [ 10 ]
Current channel: [ 10 ]
Comms quality/signal/noise: [ 18 67 49 ]
Promiscuous mode: [ Off ]
Process 802.11b Frame: [ Off ]
Port type (1=BSS, 3=ad-hoc, 6=Host AP): [ 1 ]
MAC address: [ 00:02:2d:8f:d3:f1 ]
TX rate (selection): [ 3 ]
TX rate (actual speed): [ 11 ]
Maximum data length: [ 2304 ]
RTS/CTS handshake threshold: [ 2347 ]
Create IBSS: [ Off ]
Antenna diversity (0=auto,1=pri,2=aux): [ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ]
Microwave oven robustness: [ Off ]
Roaming mode(1=firm,3=disable): [ ]
Access point density: [ 1 ]
Power Management: [ Off ]
Max sleep time: [ 100 ]
Enhanced Security mode: [ ]
Intersil Prism2-based card: [ 0 ]
Card info: [ Lucent WaveLAN/IEEE, Firmware 8.72 variant 1 ]
Encryption: [ On ]
Encryption algorithm: [ Firmware WEP ]
Authentication type
(1=OpenSys, 2=Shared Key): [ ]
TX encryption key: [ 1 ]
Encryption keys: [ ][ ][ ][ ]
ppp.conf
----------------------------------------
default:
set log Phase Chat LCP IPCP CCP tun command

jknet:
set device "!/usr/sbin/pppoe -i wi0"
set mtu max 1492
set mru max 1492
set speed sync
disable acfcomp protocomp
deny acfcomp
set authname "*************"
set authkey "******"
enable mssfixup
add! default HISADDR
Script started on Wed Nov 3 12:37:28 2004
$ su
Password:
# ppp jknet
Working in interactive mode
Using interface: tun0
ppp ON dialogica> set log local all
tun0: Timer: prompt /dev/tty: fdset(r) 0
ppp ON dialogica> dial
tun0: Timer: Select returns 1
tun0: Command: /dev/tty: dial
tun0: Phase: bundle: Establish
tun0: Phase: deflink: closed -> opening
tun0: Debug: Exec'ing ``/usr/sbin/pppoe -i wi0''
tun0: Debug: Using descriptor 2 for child
tun0: Timer: timer_Start: Inserting physical throughput timer[0x3c04b068]
tun0: Phase: deflink: Connected!
tun0: Phase: deflink: opening -> dial
tun0: Chat: deflink: Dial attempt 1 of 1
tun0: Phase: deflink: dial -> carrier
tun0: Phase: deflink: carrier -> login
tun0: Phase: deflink: login -> lcp
tun0: LCP: FSM: Using "deflink" as a transport
tun0: LCP: deflink: State change Initial --> Closed
tun0: LCP: deflink: State change Closed --> Stopped
tun0: Timer: timer_Start: Inserting LCP openmode timer[0x3c04b15c]
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
ppp ON dialogica> tun0: Timer: Select returns -1
tun0: Timer: ---- Begin of Timer Service List---
tun0: Timer: physical throughput timer[0x3c04b068]: freq = 1.00s, next = 0.00s, state = running
tun0: Timer: LCP openmode timer[0x3c04b15c]: freq = 1.00s, next = 0.20s, state = running
tun0: Timer: ---- End of Timer Service List ---
tun0: Timer: timer_Start: Inserting physical throughput timer[0x3c04b068]
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns -1
tun0: Timer: ---- Begin of Timer Service List---
tun0: Timer: LCP openmode timer[0x3c04b15c]: freq = 1.00s, next = 0.00s, state = running
tun0: Timer: physical throughput timer[0x3c04b068]: freq = 1.00s, next = 0.80s, state = running
tun0: Timer: ---- End of Timer Service List ---
tun0: LCP: deflink: LayerStart
tun0: Warning: deflink: Reducing configured MRU from 1500 to 1492
tun0: LCP: deflink: SendConfigReq(1) state = Stopped
tun0: LCP: MRU[4] 1492
tun0: LCP: MAGICNUM[6] 0x1d03dfcb
tun0: Debug: fsm_Output
tun0: Debug: 01 01 00 0e 01 04 05 d4 05 06 1d 03 df cb .......T...._K
tun0: Debug: proto_LayerPush: Using 0xc021
tun0: Sync: Write
tun0: Sync: ff 03 c0 21 01 01 00 0e 01 04 05 d4 05 06 1d 03 .@!.......T....
tun0: Sync: df cb _K
tun0: Debug: link_PushPacket: Transmit proto 0xc021
tun0: Debug: m_enqueue: len = 1
tun0: Timer: timer_Start: Inserting LCP restart timer[0x3c04b13c]
tun0: LCP: deflink: State change Stopped --> Req-Sent
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: deflink: fdset(w) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns 1
tun0: Debug: m_dequeue: queue len = 1
tun0: Debug: link_Dequeue: Dequeued from queue 1, containing 0 more packets
tun0: Physical: write
tun0: Physical: ff 03 c0 21 01 01 00 0e 01 04 05 d4 05 06 1d 03 .@!.......T....
tun0: Physical: df cb _K
tun0: Debug: deflink: DescriptorWrite: wrote 18(18) to 2
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns -1
tun0: Timer: timer_Start: Inserting physical throughput timer[0x3c04b068] before LCP restart timer[0x3c04b13c], delta = 10
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns -1
tun0: Timer: ---- Begin of Timer Service List---
tun0: Timer: physical throughput timer[0x3c04b068]: freq = 1.00s, next = 0.00s, state = running
tun0: Timer: LCP restart timer[0x3c04b13c]: freq = 3.00s, next = 1.20s, state = running
tun0: Timer: ---- End of Timer Service List ---
tun0: Timer: timer_Start: Inserting physical throughput timer[0x3c04b068] before LCP restart timer[0x3c04b13c], delta = 10
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns -1
tun0: Timer: ---- Begin of Timer Service List---
tun0: Timer: physical throughput timer[0x3c04b068]: freq = 1.00s, next = 0.00s, state = running
tun0: Timer: LCP restart timer[0x3c04b13c]: freq = 3.00s, next = 0.20s, state = running
tun0: Timer: ---- End of Timer Service List ---
tun0: Timer: timer_Start: Inserting physical throughput timer[0x3c04b068]
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns -1
tun0: Timer: ---- Begin of Timer Service List---
tun0: Timer: LCP restart timer[0x3c04b13c]: freq = 3.00s, next = 0.00s, state = running
tun0: Timer: physical throughput timer[0x3c04b068]: freq = 1.00s, next = 0.80s, state = running
tun0: Timer: ---- End of Timer Service List ---
tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent
tun0: LCP: MRU[4] 1492
tun0: LCP: MAGICNUM[6] 0x1d03dfcb
tun0: Debug: fsm_Output
tun0: Debug: 01 01 00 0e 01 04 05 d4 05 06 1d 03 df cb .......T...._K
tun0: Debug: proto_LayerPush: Using 0xc021
tun0: Sync: Write
tun0: Sync: ff 03 c0 21 01 01 00 0e 01 04 05 d4 05 06 1d 03 .@!.......T....
tun0: Sync: df cb _K
tun0: Debug: link_PushPacket: Transmit proto 0xc021
tun0: Debug: m_enqueue: len = 1
tun0: Timer: timer_Start: Inserting LCP restart timer[0x3c04b13c]
tun0: Timer: timer_Start: Inserting LCP restart timer[0x3c04b13c]
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: deflink: fdset(w) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns 1
tun0: Debug: m_dequeue: queue len = 1
tun0: Debug: link_Dequeue: Dequeued from queue 1, containing 0 more packets
tun0: Physical: write
tun0: Physical: ff 03 c0 21 01 01 00 0e 01 04 05 d4 05 06 1d 03 .@!.......T....
tun0: Physical: df cb _K
tun0: Debug: deflink: DescriptorWrite: wrote 18(18) to 2
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns -1
tun0: Timer: timer_Start: Inserting physical throughput timer[0x3c04b068] before LCP restart timer[0x3c04b13c], delta = 10
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns -1
tun0: Timer: ---- Begin of Timer Service List---
tun0: Timer: physical throughput timer[0x3c04b068]: freq = 1.00s, next = 0.00s, state = running
tun0: Timer: LCP restart timer[0x3c04b13c]: freq = 3.00s, next = 1.20s, state = running
tun0: Timer: ---- End of Timer Service List ---
tun0: Timer: timer_Start: Inserting physical throughput timer[0x3c04b068] before LCP restart timer[0x3c04b13c], delta = 10
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns -1
tun0: Timer: ---- Begin of Timer Service List---
tun0: Timer: physical throughput timer[0x3c04b068]: freq = 1.00s, next = 0.00s, state = running
tun0: Timer: LCP restart timer[0x3c04b13c]: freq = 3.00s, next = 0.20s, state = running
tun0: Timer: ---- End of Timer Service List ---
tun0: Timer: timer_Start: Inserting physical throughput timer[0x3c04b068]
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns -1
tun0: Timer: ---- Begin of Timer Service List---
tun0: Timer: LCP restart timer[0x3c04b13c]: freq = 3.00s, next = 0.00s, state = running
tun0: Timer: physical throughput timer[0x3c04b068]: freq = 1.00s, next = 0.80s, state = running
tun0: Timer: ---- End of Timer Service List ---
tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent
tun0: LCP: MRU[4] 1492
tun0: LCP: MAGICNUM[6] 0x1d03dfcb
tun0: Debug: fsm_Output
tun0: Debug: 01 01 00 0e 01 04 05 d4 05 06 1d 03 df cb .......T...._K
tun0: Debug: proto_LayerPush: Using 0xc021
tun0: Sync: Write
tun0: Sync: ff 03 c0 21 01 01 00 0e 01 04 05 d4 05 06 1d 03 .@!.......T....
tun0: Sync: df cb _K
tun0: Debug: link_PushPacket: Transmit proto 0xc021
tun0: Debug: m_enqueue: len = 1
tun0: Timer: timer_Start: Inserting LCP restart timer[0x3c04b13c]
tun0: Timer: timer_Start: Inserting LCP restart timer[0x3c04b13c]
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: deflink: fdset(w) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns 1
tun0: Debug: m_dequeue: queue len = 1
tun0: Debug: link_Dequeue: Dequeued from queue 1, containing 0 more packets
tun0: Physical: write
tun0: Physical: ff 03 c0 21 01 01 00 0e 01 04 05 d4 05 06 1d 03 .@!.......T....
tun0: Physical: df cb _K
tun0: Debug: deflink: DescriptorWrite: wrote 18(18) to 2
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns -1
tun0: Timer: ---- Begin of Timer Service List---
tun0: Timer: physical throughput timer[0x3c04b068]: freq = 1.00s, next = 0.00s, state = running
tun0: Timer: LCP restart timer[0x3c04b13c]: freq = 3.00s, next = 2.20s, state = running
tun0: Timer: ---- End of Timer Service List ---
tun0: Timer: timer_Start: Inserting physical throughput timer[0x3c04b068] before LCP restart timer[0x3c04b13c], delta = 10
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns -1
tun0: Timer: ---- Begin of Timer Service List---
tun0: Timer: physical throughput timer[0x3c04b068]: freq = 1.00s, next = 0.00s, state = running
tun0: Timer: LCP restart timer[0x3c04b13c]: freq = 3.00s, next = 1.20s, state = running
tun0: Timer: ---- End of Timer Service List ---
tun0: Timer: timer_Start: Inserting physical throughput timer[0x3c04b068] before LCP restart timer[0x3c04b13c], delta = 10
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns -1
tun0: Timer: ---- Begin of Timer Service List---
tun0: Timer: physical throughput timer[0x3c04b068]: freq = 1.00s, next = 0.00s, state = running
tun0: Timer: LCP restart timer[0x3c04b13c]: freq = 3.00s, next = 0.20s, state = running
tun0: Timer: ---- End of Timer Service List ---
tun0: Timer: timer_Start: Inserting physical throughput timer[0x3c04b068]
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns -1
tun0: LCP: deflink: SendConfigReq(1) state = Req-Sent
tun0: LCP: MRU[4] 1492
tun0: LCP: MAGICNUM[6] 0x1d03dfcb
tun0: Debug: fsm_Output
tun0: Debug: 01 01 00 0e 01 04 05 d4 05 06 1d 03 df cb .......T...._K
tun0: Debug: proto_LayerPush: Using 0xc021
tun0: Sync: Write
tun0: Sync: ff 03 c0 21 01 01 00 0e 01 04 05 d4 05 06 1d 03 .@!.......T....
tun0: Sync: df cb _K
tun0: Debug: link_PushPacket: Transmit proto 0xc021
tun0: Debug: m_enqueue: len = 1
tun0: Timer: timer_Start: Inserting LCP restart timer[0x3c04b13c]
tun0: Timer: timer_Start: Inserting LCP restart timer[0x3c04b13c]
tun0: Timer: deflink: fdset(r) 2
tun0: Timer: deflink: fdset(e) 2
tun0: Timer: deflink: fdset(w) 2
tun0: Timer: prompt /dev/tty: fdset(r) 0
tun0: Timer: Select returns 2
tun0: Physical: read
tun0: Debug: deflink: DescriptorRead: read -1/2048 from 2
tun0: Phase: deflink: read (2): Connection reset by peer
tun0: LCP: deflink: State change Req-Sent --> Starting
tun0: LCP: deflink: LayerFinish
tun0: LCP: deflink: State change Starting --> Initial
tun0: Phase: deflink: Disconnected!
tun0: Phase: deflink: lcp -> logout
tun0: Phase: deflink: Disconnected!
tun0: Phase: deflink: logout -> hangup
tun0: Debug: deflink: Close
tun0: Phase: deflink: Connect time: 11 secs: 0 octets in, 72 octets out
tun0: Phase: deflink: 0 packets in, 4 packets out
tun0: Phase: total 6 bytes/sec, peak 7 bytes/sec on Wed Nov 3 12:38:31 2004
tun0: Phase: deflink: HUPing 988
tun0: ID0: -1 = kill(988, 1)
tun0: Phase: deflink: hangup -> closed
tun0: Debug: route_IfDelete (7)
tun0: Debug: Found ff02::%tun0/32 <AF_UNSPEC>
tun0: ID0: 2 = socket(17, 3, 0)
tun0: ID0: 132 = write(2, data, 132)
tun0: Debug: wrote 132: cmd = Delete, dst = ff02::%tun0/32, gateway = <none>
tun0: ID0: 2 = socket(2, 2, 0)
tun0: ID0: 0 = ioctl(2, 3223349521, 0xcfbf73b0)
tun0: ID0: 0 = ioctl(2, 2149607696, 0xcfbf73b0)
tun0: Phase: bundle: Dead
tun0: Timer: timer_Start: Inserting dial timer[0x3c037d44]
tun0: Timer: prompt /dev/tty: fdset(r) 0
ppp ON dialogica> ^Dtun0: Timer: Select returns 1
tun0: Phase: /dev/tty: Client connection closed.
#
Script done on Wed Nov 3 12:38:58 2004