SEO

hi there,

--- usbdevs.orig Mon Mar 6 21:21:31 2006
+++ usbdevs Mon Mar 6 20:44:27 2006
@@ -404,6 +404,7 @@
vendor SIERRA 0x1199 Sierra Wireless
vendor TSUNAMI 0x1241 Tsunami
vendor PHEENET 0x124a Pheenet
+vendor RAPTORGAMING 0x1267 Raptor Gaming
vendor BELKIN2 0x1293 Belkin Components
vendor ARANEUS 0x12d8 Araneus Information Systems
vendor TAPWAVE 0x12ef Tapwave

(after the patch):
amaaq> sudo usbdevs -v -f /dev/usb1
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
port 1 addr 2: low speed, power 100 mA, config 1, PS/2+USB Mouse(0x0210), Raptor Gaming(0x1267), rev 50.24
port 2 powered

this is a Raptor Gaming "M1" mouse, but i don't know how to add the model "number".

dmesg before patch:

OpenBSD 3.9-beta (GENERIC) #602: Wed Feb 15 17:33:53 MST 2006
pvalchev@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,M CA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SB F,EST,TM2
cpu0: Enhanced SpeedStep 1800 MHz (1340 mV): speeds: 1800, 1600, 1400, 1200, 1000, 800, 600 MHz
real mem = 535339008 (522792K)
avail mem = 481468416 (470184K)
using 4278 buffers containing 26869760 bytes (26240K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(8b) BIOS, date 03/23/05, BIOS32 rev. 0 @ 0xfd700
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd700/0x900
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf20/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd6000/0x800! 0xe0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured
ppb0 at pci0 dev 1 function 0 "Intel 82852/82855 AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M10 NP" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 4
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci2 at ppb1 bus 2
"VIA VT6306 FireWire" rev 0x80 at pci2 dev 0 function 0 not configured
rl0 at pci2 dev 1 function 0 "Realtek 8139" rev 0x10: irq 11, address 00:02:3f:db:8a:23
rlphy0 at rl0 phy 0: RTL internal PHY
iwi0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11, address 00:0e:35:7b:e7:4f
cbb0 at pci2 dev 4 function 0 vendor "ENE", unknown product 0x1411 rev 0x00: irq 10
vendor "ENE", unknown product 0x0530 (class memory subclass flash, rev 0x00) at pci2 dev 4 function 1 not configured
vendor "ENE", unknown product 0x0550 (class system unknown subclass 0x05, rev 0x00) at pci2 dev 4 function 2 not configured
vendor "ENE", unknown product 0x0520 (class memory subclass flash, rev 0x00) at pci2 dev 4 function 3 not configured
cbb0: bad Vcc request. sock_ctrl 0xffffff88, sock_status 0xffffffff
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK8025GAS>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-820S, 1.50> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x03: irq 11
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 11, ICH4 AC97
ac97: codec id 0x414c4752 (Avance Logic ALC250A?)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ef75 netmask ef75 ttymask fff7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: vendor 0x1267 PS/2+USB Mouse, rev 1.10/50.24, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
why is "abbreviation" such a long word?