SEO

My sound works fine for all my apps, when I speak into my mic I can hear my
voice. However when I use an app that uses the mic, the app doesn't pick
up my voice. Almost like it's not using the right device. I use a
soundblaster live sound card and the mic works with other linux distro's
just not Slackware.

Have you set the mixer to take the Mic as the recording input?

reclusive monkey wrote:

> Have you set the mixer to take the Mic as the recording input?
Yes I have. I used kmix to do it.

Le Thu, 05 May 2005 11:07:43 -0400, R a écrit*:

> My sound works fine for all my apps, when I speak into my mic I can hear my
> voice. However when I use an app that uses the mic, the app doesn't pick
> up my voice. Almost like it's not using the right device. I use a
> soundblaster live sound card and the mic works with other linux distro's
> just not Slackware.

Test this :
# amixer |grep control

nd find the lines about your Mic, like :
....
Simple mixer control 'Mic',0
Simple mixer control 'Mic Boost (+20dB)',0
Simple mixer control 'Mic Select',0

There you see my Mic is disabled, so is probably yours :-)

Then, adjust it whith `alsamixer' or `amixer'

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Loki Harfagr wrote:
> Le Thu, 05 May 2005 11:07:43 -0400, R a écrit :
>
>
>>My sound works fine for all my apps, when I speak into my mic I can hear my
>>voice. However when I use an app that uses the mic, the app doesn't pick
>>up my voice. Almost like it's not using the right device. I use a
>>soundblaster live sound card and the mic works with other linux distro's
>>just not Slackware.
>
>
> Test this :
> # amixer |grep control
>
> nd find the lines about your Mic, like :
> ...
> Simple mixer control 'Mic',0
> Simple mixer control 'Mic Boost (+20dB)',0
> Simple mixer control 'Mic Select',0
>
> There you see my Mic is disabled, so is probably yours :-)
>
> Then, adjust it whith `alsamixer' or `amixer'
I have a SBLive24Bit and has not ever been able to get the "Mic" to
work, does not even show up. I have the alsa drivers 1.0.9rc2 and it
still will not let the mic work. The mic is a 80.00 Sony stereo Mic I
have had for years, and it worked up till I installed Slackware. Any
ansewers?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.7 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFCev7lINZ7DdGGEYkRAhkJAKCIib/6QF8lfsbzVQVmfvuhiqhZ2ACg1ou/
XcqUCT5j98iE/xoPH9OALpY=
=KKOB
-----END PGP SIGNATURE-----

Le Thu, 05 May 2005 22:21:42 -0700, BenneJezzerette a écrit*:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Loki Harfagr wrote:
>> Le Thu, 05 May 2005 11:07:43 -0400, R a écrit :
>>
>>
>>>My sound works fine for all my apps, when I speak into my mic I can hear my
>>>voice. However when I use an app that uses the mic, the app doesn't pick
>>>up my voice. Almost like it's not using the right device. I use a
>>>soundblaster live sound card and the mic works with other linux distro's
>>>just not Slackware.
>>
>>
>> Test this :
>> # amixer |grep control
....
>> There you see my Mic is disabled, so is probably yours :-)
>>
>> Then, adjust it whith `alsamixer' or `amixer'

> I have a SBLive24Bit and has not ever been able to get the "Mic" to
> work, does not even show up. I have the alsa drivers 1.0.9rc2 and it
> still will not let the mic work. The mic is a 80.00 Sony stereo Mic I
> have had for years, and it worked up till I installed Slackware.

It'd have been quite a good move to try and list the said test :-)
# amixer |grep control

Then, maybe provide some more information, whatever you may have
found while searching ?

> I have the alsa drivers 1.0.9rc2

Also, as you seem to follow the source path, you can try the 1.0.9-rc3
released on last Monday, though I doubt there's anything related to your
card (I didn(t check that) you may find some interesting warning or other
message while configuring and building all over again ?

> Any
> ansewers?
Any quesetions ?-)

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Loki Harfagr wrote:
> Le Thu, 05 May 2005 22:21:42 -0700, BenneJezzerette a écrit :
>
>
>>-----BEGIN PGP SIGNED MESSAGE-----
>>Hash: SHA1
>>
>>Loki Harfagr wrote:
>>
>>>Le Thu, 05 May 2005 11:07:43 -0400, R a écrit :
>>>
>>>
>>>
>>>>My sound works fine for all my apps, when I speak into my mic I can hear my
>>>>voice. However when I use an app that uses the mic, the app doesn't pick
>>>>up my voice. Almost like it's not using the right device. I use a
>>>>soundblaster live sound card and the mic works with other linux distro's
>>>>just not Slackware.
>>>
>>>
>>>Test this :
>>># amixer |grep control
>
> ...
>
>>>There you see my Mic is disabled, so is probably yours :-)
>>>
>>>Then, adjust it whith `alsamixer' or `amixer'
>
>
>>I have a SBLive24Bit and has not ever been able to get the "Mic" to
>>work, does not even show up. I have the alsa drivers 1.0.9rc2 and it
>>still will not let the mic work. The mic is a 80.00 Sony stereo Mic I
>>have had for years, and it worked up till I installed Slackware.
>
>
> It'd have been quite a good move to try and list the said test :-)
> # amixer |grep control
>
> Then, maybe provide some more information, whatever you may have
> found while searching ?
>
>
>>I have the alsa drivers 1.0.9rc2
>
>
> Also, as you seem to follow the source path, you can try the 1.0.9-rc3
> released on last Monday, though I doubt there's anything related to your
> card (I didn(t check that) you may find some interesting warning or other
> message while configuring and building all over again ?
>
>
>>Any
>>ansewers?
>
> Any quesetions ?-)
>
Cools, going to go get it right away. TY for the tips to.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.7 (GNU/Linux)

iD8DBQFCfQC5EvcjnBj6QvERAmSPAJ90TefuWXaHWJwM4af8OI z5wTj77gCgpbHd
8CnrXeZ7Fp1Gj0QaHpmB0Kc=
=NOq+
-----END PGP SIGNATURE-----

On Thu, 05 May 2005 18:01:34 +0200, Loki Harfagr wrote:

> Test this :
> # amixer |grep control

Try it without the comment ;-)

--

..

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Vigil wrote:
> On Thu, 05 May 2005 18:01:34 +0200, Loki Harfagr wrote:
>
>
>>Test this :
>># amixer |grep control
>
>
> Try it without the comment ;-)
>

root@krynn:~# amixer | grep control
Simple mixer control 'AC97 in',0
Simple mixer control 'Analog Center/LFE',0
Simple mixer control 'Analog Front',0
Simple mixer control 'Analog Rear',0
Simple mixer control 'Analog Unknown',0
Simple mixer control 'CAPTURE feedback into PLAYBACK',0
Simple mixer control 'SPDIF Center/LFE',0
Simple mixer control 'SPDIF Front',0
Simple mixer control 'SPDIF Out',0
Simple mixer control 'SPDIF Rear',0
Simple mixer control 'SPDIF Unknown',0
Simple mixer control 'SPDIF in',0
Simple mixer control 'SPDIF out',0
Simple mixer control 'SRC out',0
Simple mixer control 'i2s in',0
Simple mixer control 'i2s mixer out',0
root@krynn:~#

is what I get
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.7 (GNU/Linux)

iD8DBQFCfYfNEvcjnBj6QvERAs9VAJ4l6j4qPUu/FJ9JSr94gMSZL6QcvgCeIhdK
b0h3V9Se+xYmpZd6ozpGBQ0=
=IXyK
-----END PGP SIGNATURE-----

"BenneJezzerette" <jennifer755@cox.net> wrote in message
news:uJffe.3747$Fa1.254@fed1read02...

<snip pointless drivel>

> is what I get

What the fuck was the point in that post?