SEO

#1 (**permalink**) 02-27-2008, 03:49 AM

I have to do a full refresh with starting capture with mode = cold.
After that capture is up and running, but:

2005-05-23-09.41.41.613431 <CWorkerMain> ASN0109I CAPTURE "ASN". The
Capture pr
ogram has successfully initialized and is capturing data changes for "0"
registr
ations. "0" registrations are in a stopped state. "2" registrations are in
an in
active state.

Nothing found in the doc's to activate the state for the registration.

best regards,
Joachim Müller

#2 (**permalink**) 02-27-2008, 03:49 AM

Hi,

Joachim Müller wrote:
> I have to do a full refresh with starting capture with mode = cold.
> After that capture is up and running, but:
>
> 2005-05-23-09.41.41.613431 <CWorkerMain> ASN0109I CAPTURE "ASN". The
> Capture pr
> ogram has successfully initialized and is capturing data changes for "0"
> registr
> ations. "0" registrations are in a stopped state. "2" registrations are in
> an in
> active state.
>
> Nothing found in the doc's to activate the state for the registration.

If I got you right, you did a manual full refresh and you now need to
reinit the capture. There is a pretty nice Technote about manual full
refresh. You can find it on http://www.ibm.com/support by searching for
"manual full refresh".

Title:
" How do I perform a manual full refresh for update-anywhere replication
instead of using the Apply program to do the full refresh?" , last
modified 2004-05-17

This works for usercopy-scenario as well.

best regards,

Norbert

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

SEO

Replication Cold Start