SEO

Hi all,

After downloading and installing the latest Postgresql server (postgresql-8.2.3-1.zip)
I can not make it accept local IP connections!
I edit the pg_hba.conf file with

host all all 192.168.100.1/32 trust
but still I can't connect from 192.168.100.1 to the DB.
Also during the installation I checked the option "Accept TCP connections.." (or something like that)

Am I missing something or it is a possible bug ?

Thanks
George


---------------------------------
×ñçóéìïðïéåßôå Yahoo!
ÂáñåèÞêáôå ôá åíï÷ëçôéêÜ ìçíý ìáôá (spam); Ôï Yahoo! Mail äéáèÝôåé ôçí êáëýôåñç äõíáôÞ ðñïóôáóßá êáôÜ ôùí åíï÷ëçôéêþí ìçíõìÜôùí
http://login.yahoo.com/config/mail?.intl=gr

gpio Oxxce wrote:
> Hi all,
>
> After downloading and installing the latest Postgresql server
> (postgresql-8.2.3-1.zip
> <http://wwwmaster.postgresql.org/download/mirrors-ftp?file=binary%2Fv8.2.3%2Fwin32%2Fpostgresql-8.2.3-1.zip>)
> I can not make it accept local IP connections!
> I edit the |pg_hba.conf |file with
>
> host all all 192.168.100.1/32 trust
>
> but still I can't connect from 192.168.100.1 to the DB.
> Also during the installation I checked the option "Accept TCP
> connections.." (or something like that)
>
> Am I missing something or it is a possible bug ?
>
> Thanks
> George
>

In putting in the above line did you replace the host line with address
"127.0.0.1/32"? If so, that's probably your problem - it needs the 127*
line. Is postmaster listening on the default port (5432) or did you
change that during install? (Can check that in the postgresql.conf file
in the same place as pg_hba.conf)

How are you trying to connect? (pgAdminIII, some other program using the
ODBC driver?) What error are you getting?

NB: I get access denied if I put my servers IP address into the
pg_hba.conf file and comment out the existing 127 address line. Local
connections would not go out through the network and would thus not be
seen by PG as coming from your 192/168 address.

P.

--
Paul Lambert
Database Administrator
AutoLedgers


---------------------------(end of broadcast)---------------------------
TIP 5: don't forget to increase your free space map settings

Hi Paul, All,

My host pg_hba.conf:
host all all 127.0.0.1/32 md5
host all all 192.168.1.1/32 trust
host all all 192.168.1.2/32 trust

and postgresql.conf:
listen_addresses = '*'
port = 5432
max_connections = 100

the 192.168.1.1 is also the server IP, and I am tryning to connect from the 192.168.1.2 with pgExlorer and pgAdmin but I get a message :
"Cannot connect to Server. Connection timeout . Chech if the server is running and accepting TCP connections on 5432"

I will try to setup the database and see if this happens also the binary distribution without the installer.

Thx
George


Paul Lambert <paul.lambert@autoledgers.com.au> Ýãñáøå: gpio Oxxce wrote:
> Hi all,
>
> After downloading and installing the latest Postgresql server
> (postgresql-8.2.3-1.zip
> )
> I can not make it accept local IP connections!
> I edit the |pg_hba.conf |file with
>
> host all all 192.168.100.1/32 trust
>
> but still I can't connect from 192.168.100.1 to the DB.
> Also during the installation I checked the option "Accept TCP
> connections.." (or something like that)
>
> Am I missing something or it is a possible bug ?
>
> Thanks
> George
>

In putting in the above line did you replace the host line with address
"127.0.0.1/32"? If so, that's probably your problem - it needs the 127*
line. Is postmaster listening on the default port (5432) or did you
change that during install? (Can check that in the postgresql.conf file
in the same place as pg_hba.conf)

How are you trying to connect? (pgAdminIII, some other program using the
ODBC driver?) What error are you getting?

NB: I get access denied if I put my servers IP address into the
pg_hba.conf file and comment out the existing 127 address line. Local
connections would not go out through the network and would thus not be
seen by PG as coming from your 192/168 address.

P.

--
Paul Lambert
Database Administrator
AutoLedgers


---------------------------(end of broadcast)---------------------------
TIP 5: don't forget to increase your free space map settings



---------------------------------
×ñçóéìïðïéåßôå Yahoo!
ÂáñåèÞêáôå ôá åíï÷ëçôéêÜ ìçíý ìáôá (spam); Ôï Yahoo! Mail äéáèÝôåé ôçí êáëýôåñç äõíáôÞ ðñïóôáóßá êáôÜ ôùí åíï÷ëçôéêþí ìçíõìÜôùí
http://login.yahoo.com/config/mail?.intl=gr

---------------------------------
×ñçóéìïðïéåßôå Yahoo!
ÂáñåèÞêáôå ôá åíï÷ëçôéêÜ ìçíý ìáôá (spam); Ôï Yahoo! Mail äéáèÝôåé ôçí êáëýôåñç äõíáôÞ ðñïóôáóßá êáôÜ ôùí åíï÷ëçôéêþí ìçíõìÜôùí
http://login.yahoo.com/config/mail?.intl=gr

If you're running one of Windows XP SP2 or Windows Server 2003, the
Windows Firewall will be blocking the connection.
If you have the "Windows Firewall" option in Control Panel, check it's
disabled, then try again.

If that cures your problem, add an exception in for port 5432 before you
turn the firewall back on.

Andy.


gpio Oxxce wrote:
> Hi Paul, All,
>
> My host pg_hba.conf:
> host all all 127.0.0.1/32 md5
> host all all 192.168.1.1/32 trust
> host all all 192.168.1.2/32 trust
>
> and postgresql.conf:
> listen_addresses = '*'
> port = 5432
> max_connections = 100
>
> the 192.168.1.1 is also the server IP, and I am tryning to connect
> from the 192.168.1.2 with pgExlorer and pgAdmin but I get a message :
> "Cannot connect to Server. Connection timeout . Chech if the server is
> running and accepting TCP connections on 5432"
>
> I will try to setup the database and see if this happens also the
> binary distribution without the installer.
>
> Thx
> George
>
>
> */Paul Lambert <paul.lambert@autoledgers.com.au>/* Ýãñáøå:
>
> gpio Oxxce wrote:
> > Hi all,
> >
> > After downloading and installing the latest Postgresql server
> > (postgresql-8.2.3-1..zip
> > )
> > I can not make it accept local IP connections!
> > I edit the |pg_hba.conf |file with
> >
> > host all all 192.168.100.1/32 trust
> >
> > but still I can't connect from 192.168.100.1 to the DB.
> > Also during the installation I checked the option "Accept TCP
> > connections.." (or something like that)
> >
> > Am I missing something or it is a possible bug ?
> >
> > Thanks
> > George
> >
>
> In putting in the above line did you replace the host line with
> address
> "127.0.0.1/32"? If so, that's probably your problem - it needs the
> 127*
> line. Is postmaster listening on the default port (5432) or did you
> change that during install? (Can check that in the postgresql.conf
> file
> in the same place as pg_hba.conf)
>
> How are you trying to connect? (pgAdminIII, some other program
> using the
> ODBC driver?) What error are you getting?
>
> NB: I get access denied if I put my servers IP address into the
> pg_hba.conf file and comment out the existing 127 address line. Local
> connections would not go out through the network and would thus
> not be
> seen by PG as coming from your 192/168 address.
>
> P..
>
> --
> Paul Lambert
> Database Administrator
> AutoLedgers
>
>
> ---------------------------(end of
> broadcast)---------------------------
> TIP 5: don't forget to increase your free space map settings
>
>
> ------------------------------------------------------------------------
> ×ñçóéìïðïéåßôå Yahoo!
> ÂáñåèÞêáôå ôá åíï÷ëçôéêÜ ìçíý ìáôá (spam); Ôï Yahoo! Mail äéáèÝôåé ôçí
> êáëýôåñç äõíáôÞ ðñïóôáóßá êáôÜ ôùí åíï÷ëçôéêþí ìçíõìÜôùí
> http://login.yahoo.com/config/mail?.intl=gr
>
> ------------------------------------------------------------------------
> ×ñçóéìïðïéåßôå Yahoo!
> ÂáñåèÞêáôå ôá åíï÷ëçôéêÜ ìçíý ìáôá (spam); Ôï Yahoo! Mail äéáèÝôåé ôçí
> êáëýôåñç äõíáôÞ ðñïóôáóßá êáôÜ ôùí åíï÷ëçôéêþí ìçíõìÜôùí
> http://login.yahoo.com/config/mail?.intl=gr
> !DSPAM:37,45d2ce7b18511494436004!


--
Andy Shellam
NetServe Support Team

the Mail Network
"an alternative in a standardised world"

p: +44 (0) 121 288 0832/0839
m: +44 (0) 7818 000834

Hi All,

You have right, the windows firewall caused the problem !!
Thx again

George

"Andy Shellam (Mailing Lists)" <andy.shellam-lists@mailnetwork.co.uk> Ýãñáøå: If you're running one of Windows XP SP2 or Windows Server 2003, the Windows Firewall will be blocking the connection.
If you have the "Windows Firewall" option in Control Panel, check it's disabled, then try again.

If that cures your problem, add an exception in for port 5432 before you turn the firewall back on.

Andy.


gpio Oxxce wrote: Hi Paul, All,

My host pg_hba.conf:
host all all 127.0.0.1/32 md5
host all all 192.168.1.1/32 trust
host all all 192.168.1.2/32 trust

and postgresql.conf:
listen_addresses = '*'
port = 5432
max_connections = 100

the 192.168.1.1 is also the server IP, and I am tryning to connect from the 192.168.1.2 with pgExlorer and pgAdmin but I get a message :
"Cannot connect to Server. Connection timeout . Chech if the server is running and accepting TCP connections on 5432"

I will try to setup the database and see if this happens also the binary distribution without the installer.

Thx
George


Paul Lambert <paul.lambert@autoledgers.com.au> Ýãñáøå: gpio Oxxce wrote:
> Hi all,
>
> After downloading and installing the latest Postgresql server
> (postgresql-8.2.3-1..zip
> )
> I can not make it accept local IP connections!
> I edit the |pg_hba.conf |file with
>
> host all all 192.168.100.1/32 trust
>
> but still I can't connect from 192.168.100.1 to the DB.
> Also during the installation I checked the option "Accept TCP
> connections.." (or something like that)
>
> Am I missing something or it is a possible bug ?
>
> Thanks
> George
>

In putting in the above line did you replace the host line with address
"127.0.0.1/32"? If so, that's probably your problem - it needs the 127*
line. Is postmaster listening on the default port (5432) or did you
change that during install? (Can check that in the postgresql.conf file
in the same place as pg_hba.conf)

How are you trying to connect? (pgAdminIII, some other program using the
ODBC driver?) What error are you getting?

NB: I get access denied if I put my servers IP address into the
pg_hba.conf file and comment out the existing 127 address line. Local
connections would not go out through the network and would thus not be
seen by PG as coming from your 192/168 address.

P..

--
Paul Lambert
Database Administrator
AutoLedgers


---------------------------(end of broadcast)---------------------------
TIP 5: don't forget to increase your free space map settings



---------------------------------
×ñçóéìïðïéåßôå Yahoo!
ÂáñåèÞêáôå ôá åíï÷ëçôéêÜ ìçíý ìáôá (spam); Ôï Yahoo! Mail äéáèÝôåé ôçí êáëýôåñç äõíáôÞ ðñïóôáóßá êáôÜ ôùí åíï÷ëçôéêþí ìçíõìÜôùí
http://login.yahoo.com/config/mail?.intl=gr

---------------------------------
×ñçóéìïðïéåßôå Yahoo!
ÂáñåèÞêáôå ôá åíï÷ëçôéêÜ ìçíý ìáôá (spam); Ôï Yahoo! Mail äéáèÝôåé ôçí êáëýôåñç äõíáôÞ ðñïóôáóßá êáôÜ ôùí åíï÷ëçôéêþí ìçíõìÜôùí
http://login.yahoo.com/config/mail?.intl=gr !DSPAM:37,45d2ce7b18511494436004!


--
Andy Shellam
NetServe Support Team

the Mail Network
"an alternative in a standardised world"

p: +44 (0) 121 288 0832/0839
m: +44 (0) 7818 000834



---------------------------------
×ñçóéìïðïéåßôå Yahoo!
ÂáñåèÞêáôå ôá åíï÷ëçôéêÜ ìçíý ìáôá (spam); Ôï Yahoo! Mail äéáèÝôåé ôçí êáëýôåñç äõíáôÞ ðñïóôáóßá êáôÜ ôùí åíï÷ëçôéêþí ìçíõìÜôùí
http://login.yahoo.com/config/mail?.intl=gr

---------------------------------
×ñçóéìïðïéåßôå Yahoo!
ÂáñåèÞêáôå ôá åíï÷ëçôéêÜ ìçíý ìáôá (spam); Ôï Yahoo! Mail äéáèÝôåé ôçí êáëýôåñç äõíáôÞ ðñïóôáóßá êáôÜ ôùí åíï÷ëçôéêþí ìçíõìÜôùí
http://login.yahoo.com/config/mail?.intl=gr