My Sun server have 2 Gb Fibre card connected to 3510
I have installed Sun Storedge package and since, i show the disk by the 2
cards.

AVAILABLE DISK SELECTIONS:

0. c0t0d0 <ST320011A cyl 38790 alt 2 hd 16 sec 63>

/pci@1f,0/ide@d/dad@0,0

1. c0t2d0 <ST320011A cyl 38790 alt 2 hd 16 sec 63>

/pci@1f,0/ide@d/dad@2,0

2. c1t40d0 <SUN-StorEdge3510-327K cyl 35424 alt 2 hd 127 sec 127>

/pci@1f,0/pci@5/SUNW,qlc@0/fp@0,0/ssd@w216000c0ff800dde,0

3. c2t40d0 <SUN-StorEdge3510-327K cyl 35424 alt 2 hd 127 sec 127>

/pci@1f,0/pci@5/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff800dde,0

Since I have set in /kernel/drv/scsi_vhci.conf

mpxio-disable="no";


Idon't show my disks


AVAILABLE DISK SELECTIONS:



0. c0t0d0 <ST320011A cyl 38790 alt 2 hd 16 sec 63>

/pci@1f,0/ide@d/dad@0,0

1. c0t2d0 <ST320011A cyl 38790 alt 2 hd 16 sec 63>

/pci@1f,0/ide@d/dad@2,0



Anyonde can explain me why ?

In article <3f13a378$1_1@news.vo.lu>, "mika" <hakzia@hotmail.com>
wrote:

> My Sun server have 2 Gb Fibre card connected to 3510
> I have installed Sun Storedge package and since, i show the disk by the 2
> cards.
>
> AVAILABLE DISK SELECTIONS:
>
> 0. c0t0d0 <ST320011A cyl 38790 alt 2 hd 16 sec 63>
>
> /pci@1f,0/ide@d/dad@0,0
>
> 1. c0t2d0 <ST320011A cyl 38790 alt 2 hd 16 sec 63>
>
> /pci@1f,0/ide@d/dad@2,0
>
> 2. c1t40d0 <SUN-StorEdge3510-327K cyl 35424 alt 2 hd 127 sec 127>
>
> /pci@1f,0/pci@5/SUNW,qlc@0/fp@0,0/ssd@w216000c0ff800dde,0
>
> 3. c2t40d0 <SUN-StorEdge3510-327K cyl 35424 alt 2 hd 127 sec 127>
>
> /pci@1f,0/pci@5/SUNW,qlc@1/fp@0,0/ssd@w216000c0ff800dde,0
>
> Since I have set in /kernel/drv/scsi_vhci.conf
>
> mpxio-disable="no";
>
>
> Idon't show my disks
>
>
> AVAILABLE DISK SELECTIONS:
>
>
>
> 0. c0t0d0 <ST320011A cyl 38790 alt 2 hd 16 sec 63>
>
> /pci@1f,0/ide@d/dad@0,0
>
> 1. c0t2d0 <ST320011A cyl 38790 alt 2 hd 16 sec 63>
>
> /pci@1f,0/ide@d/dad@2,0
>
>
>
> Anyonde can explain me why ?
>
>

Didn't you get the memo:

> On Mon, 14 Jul 2003 14:07:34 UTC, "mika" <hakzia@hotmail.com> wrote:
>
> >
> > Since I have set in /kernel/drv/scsi_vhci.conf
> >
> > mpxio-disable="no";
> >
> >
> > Idon't show my disks
> >
>
> I installed a 3510FC some days ago and if remember correct the
> documentation for the 3510FC says that mpxio is NOT supported for the
> 3510FC at this time.
>
> regards
>
> Bernd

--
DeeDee, don't press that button! DeeDee! NO! Dee...

In article <bf1og9$595$2@eol.dd.chalmers.se>,
Fredrik Lundholm <dol@ce.chalmers.se> wrote:
>In article <3f13a378$1_1@news.vo.lu>, mika <hakzia@hotmail.com> wrote:
>>My Sun server have 2 Gb Fibre card connected to 3510
>>I have installed Sun Storedge package and since, i show the disk by the 2
>>cards.

Just to annoy I follow up on my own posts..

>Also make sure you run Suns SAN 4.2 release.

This means in practice that you MUST have patch 111412-11 for Solaris 8
or 113039-03 for Solaris 9, which adds 3510FC support to MPXIO.

/wfr
Fredrik


--
Fredrik Lundholm
dol @ ce.chalmers.se