Unix Technical Forum

hardare config question

This is a discussion on hardare config question within the Pgsql Performance forums, part of the PostgreSQL category; --> On Mon, 2006-05-01 at 13:22, Tom Arthurs wrote: > UPS does not protect against the tech behind the rack ...


Go Back   Unix Technical Forum > Database Server Software > PostgreSQL > Pgsql Performance

FAQ Members List Calendar Search Today's Posts Mark Forums Read
  #11 (permalink)  
Old 04-19-2008, 07:42 AM
Scott Marlowe
 
Posts: n/a
Default Re: hardare config question

On Mon, 2006-05-01 at 13:22, Tom Arthurs wrote:
> UPS does not protect against the tech behind the rack unplugging the
> power cable, or an accidental power cycle from exercising the wrong
> switch. Both are probably more common causes of failure than a total
> power outage.
>
> Erik Myllymaki wrote:
> > I have been in discussion with 3ware support and after adjusting some
> > settings, the 3ware card in RAID 1 gets better performance than the
> > single drive. I guess this had everything to do with the write (and
> > maybe read?) cache.
> >
> > Of course now i am in a dangerous situation - using volatile write
> > cache without a BBU.
> >
> > If I were to use a UPS to ensure a soft shutdown in the event of power
> > loss, am I somewhat as safe as if I were to purchase a BBU for this
> > RAID card?


Nor does it prevent an electrician from dropping a tiny piece of wire
into a power conditioner, causing a feedback that blows the other two
power conditioners, all three industrial UPSes, and the switch that
allows the Diesal generator to take over.

When that happened to me, I had the only database server in the company
to come back up 100% in tact. You can guess by now I also had the only
database server with battery backed cache...

---------------------------(end of broadcast)---------------------------
TIP 9: In versions below 8.0, the planner will ignore your desire to
choose an index scan if your joining column's datatypes do not
match

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #12 (permalink)  
Old 04-19-2008, 07:42 AM
Erik Myllymaki
 
Posts: n/a
Default Re: hardare config question

guess who just bought a 3ware BBU on ebay...

Thanks for all the posts, consider me educated!

(on the importance of BBU on RAID controllers, anyway)




Scott Marlowe wrote:
> On Mon, 2006-05-01 at 13:22, Tom Arthurs wrote:
>> UPS does not protect against the tech behind the rack unplugging the
>> power cable, or an accidental power cycle from exercising the wrong
>> switch. Both are probably more common causes of failure than a total
>> power outage.
>>
>> Erik Myllymaki wrote:
>>> I have been in discussion with 3ware support and after adjusting some
>>> settings, the 3ware card in RAID 1 gets better performance than the
>>> single drive. I guess this had everything to do with the write (and
>>> maybe read?) cache.
>>>
>>> Of course now i am in a dangerous situation - using volatile write
>>> cache without a BBU.
>>>
>>> If I were to use a UPS to ensure a soft shutdown in the event of power
>>> loss, am I somewhat as safe as if I were to purchase a BBU for this
>>> RAID card?

>
> Nor does it prevent an electrician from dropping a tiny piece of wire
> into a power conditioner, causing a feedback that blows the other two
> power conditioners, all three industrial UPSes, and the switch that
> allows the Diesal generator to take over.
>
> When that happened to me, I had the only database server in the company
> to come back up 100% in tact. You can guess by now I also had the only
> database server with battery backed cache...
>
> ---------------------------(end of broadcast)---------------------------
> TIP 9: In versions below 8.0, the planner will ignore your desire to
> choose an index scan if your joining column's datatypes do not
> match


---------------------------(end of broadcast)---------------------------
TIP 6: explain analyze is your friend

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


All times are GMT. The time now is 03:41 PM.


Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0
www.UnixAdminTalk.com