SEO

#1 (**permalink**) 04-19-2008, 08:10 AM

Run bonnie++ version 1.03 and report results here.

- Luke

Sent from my GoodLink synchronized handheld (www.good.com)

-----Original Message-----
From: Kjell Tore Fossbakk [mailto:kjelltore@gmail.com]
Sent: Sunday, July 30, 2006 03:03 PM Eastern Standard Time
To: Claus Guttesen
Cc: pgsql-performance@postgresql.org
Subject: Re: [PERFORM] Performance with 2 AMD/Opteron 2.6Ghz and 8gig DDR PC3200

Hello.

OS: Gentoo 2006.0 with gentoo's hardened kernel
Version: I haven't checked. Im guessing 8.0.8 (latest stable on all systems)
or 8.1.4 which is the latest package.

I'm still gonna try to run with smart array 5i. How can i find out that my
performance with that is crappy? Without ripping down my systems, and using
software raid?

Kjell Tore

On 7/28/06, Claus Guttesen <kometen@gmail.com> wrote:
>
> > As I have understood, there is alot of tuning using both postgres.confand
> > analyzing queries to make the values of postgres.conf fit my needs,
> system
> > and hardware. This is where I need some help. I have looked into
> > postgres.conf , and seen the tunings. But I'm still not sure what I
> should
> > put into those variables (in postgres.conf) with my hardware.
> >
> > Any suggestions would be most appreciated!
>
> What OS is it running and what version is postgresql?
>
> regards
> Claus
>

--
"Be nice to people on your way up because you meet them on your way down."

---------------------------(end of broadcast)---------------------------
TIP 5: don't forget to increase your free space map settings

#2 (**permalink**) 04-19-2008, 08:10 AM

Okey!

The thing is, im on vacation. So ill report in about 3 weeks time.. Sry
guys.. :-)

Kjell Tore

On 7/30/06, Luke Lonergan <LLonergan@greenplum.com> wrote:
>
> Run bonnie++ version 1.03 and report results here.
>
>
> - Luke
>
> Sent from my GoodLink synchronized handheld (www.good.com)
>
>
> -----Original Message-----
> From: Kjell Tore Fossbakk [mailto:kjelltore@gmail.com]
> Sent: Sunday, July 30, 2006 03:03 PM Eastern Standard Time
> To: Claus Guttesen
> Cc: pgsql-performance@postgresql.org
> Subject: Re: [PERFORM] Performance with 2 AMD/Opteron 2.6Ghz and
> 8gig DDR PC3200
>
> Hello.
>
> OS: Gentoo 2006.0 with gentoo's hardened kernel
> Version: I haven't checked. Im guessing 8.0.8 (latest stable on all
> systems)
> or 8.1.4 which is the latest package.
>
> I'm still gonna try to run with smart array 5i. How can i find out that my
> performance with that is crappy? Without ripping down my systems, and
> using
> software raid?
>
> Kjell Tore
>
> On 7/28/06, Claus Guttesen <kometen@gmail.com> wrote:
> >
> > > As I have understood, there is alot of tuning using both
> postgres.confand
> > > analyzing queries to make the values of postgres.conf fit my needs,
> > system
> > > and hardware. This is where I need some help. I have looked into
> > > postgres.conf , and seen the tunings. But I'm still not sure what I
> > should
> > > put into those variables (in postgres.conf) with my hardware.
> > >
> > > Any suggestions would be most appreciated!
> >
> > What OS is it running and what version is postgresql?
> >
> > regards
> > Claus
> >
>
>
>
> --
> "Be nice to people on your way up because you meet them on your way down."
>
>

--
"Be nice to people on your way up because you meet them on your way down."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

SEO

Re: Performance with 2 AMD/Opteron 2.6Ghz and 8gig